Lexmark Se 3455 Guia Do Utilizador
307
Memory and Option Cards
M
e
m
o
ry
a
n
dO
p
tio
nC
a
rd
s
Installing Options
Removing a Flash Memory Option
W
ARNING
:
Electronic components are easily damaged by
static electricity. Touch something metal
before you touch the flash memory option.
static electricity. Touch something metal
before you touch the flash memory option.
1
If necessary, follow the steps under “Accessing the
Printer System Board” on page 293.
Printer System Board” on page 293.
2
Locate the flash memory option.
See page 296.
3
Push out on the metal clips at each end of the connector.
4
Rotate the flash memory option out to a 45° angle, and
gently pull it out of the connector.
gently pull it out of the connector.
5
Place the flash memory option in its original packaging.
If you did not save the packaging, wrap it in paper and
store it in a box.
If you did not save the packaging, wrap it in paper and
store it in a box.
6
If you need to install a replacement flash memory option
or other option on the system board:
or other option on the system board:
-
-
-
7
See “Closing the Printer System Board” on page 297 to
reattach the shield and side door.
reattach the shield and side door.