Lexmark C530 Guia Do Utilizador
Notes:
•
The entire length of the connector on the card must touch and be flush against the system board.
•
Be careful not to damage the connectors.
5
Reinstall the system board access cover.
6
Set the printer software to recognize the flash memory.
a
Click Start
Settings Printers.
b
Double-click the printer icon.
c
Click File
Properties.
d
Click the Install Options tab.
e
From the Available Options list, select Flash memory.
f
Click Add.
g
Click OK.
Installing a printer hard disk
Note: A #2 Phillips screwdriver is needed to attach the hard disk to the mounting plate.
Warning: Hard disks are easily damaged by static electricity. Touch something metal on the printer before touching
a disk.
a disk.
Note: If an option card has been installed, you may need to remove it before installing the hard disk.
1
Access the system board. For more information, see “Accessing the system board to install internal options” on
page 15.
page 15.
2
Remove the mounting plate, hard disk, ribbon cable, and attachment screws from the package.
3
Align the ribbon cable connector with the connector pins on the hard disk.
Installing options
22