Lexmark C530 Guia Do Utilizador
6
Press
until
Set A
appears, and then press
.
7
From the printed sheet, find the straightest of the 20 lines beside the letter A.
8
Press
or
until that number is displayed, and then press
.
Submitting Selection
appears.
9
Repeat steps 6 through 8 to align sets A through L.
10
Press
.
11
Press
until
Exit Config Menu
appears, and then press
.
Resetting the Printer
appears briefly, followed by a clock, and then Ready appears.
Cleaning the printhead lenses
Clean the printhead lenses if you encounter print quality problems. For more information, see “Solving print quality
problems” on page 87.
problems” on page 87.
Warning: To avoid overexposing the photoconductors, do not leave the inner door open longer than 10 minutes.
1
Open the upper and inner doors.
2
Remove all four toner cartridges. For more information, see “Removing the color supplies” on page 51, but do
not remove the photoconductors for this procedure.
not remove the photoconductors for this procedure.
3
Locate the four printhead lenses.
1
1
Printhead lenses
4
Clean the lenses using a can of compressed air.
Warning: Do not touch the printhead lenses or they may be damaged.
5
Reinstall the toner cartridges.
6
Close the doors.
Ordering supplies
To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies
dealers in your area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the
place you purchased the printer.
dealers in your area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the
place you purchased the printer.
Maintaining the printer
70