Lexmark 1200 Guia Da Instalação
52
Install memory and network options
Reinstalling the
system board
After you have installed all options on the system board,
complete the following steps to reinstall the system board:
complete the following steps to reinstall the system board:
1
Align the system board with the printer opening,
as shown.
as shown.
2
Rest the system board on the lip at the front of the
opening.
opening.
3
Carefully slide the system board all the way into
the printer.
the printer.
The security tab on the right side of the printer
should fit through the slot in the faceplate. You can
attach a padlock to the security tab to prevent access
to the system board.
should fit through the slot in the faceplate. You can
attach a padlock to the security tab to prevent access
to the system board.
4
Firmly press the faceplate in the area indicated by
the arrow.
the arrow.
This ensures the connector on the back of the system
board inserts completely into the connector at the
back of the printer opening.
board inserts completely into the connector at the
back of the printer opening.
5
Securely tighten the six thumbscrews on the sys-
tem board faceplate.
tem board faceplate.
6
If necessary, reattach the rear output bin.
If you have trouble installing the bin, make sure the
screws on the system board faceplate are completely
inserted.
screws on the system board faceplate are completely
inserted.
Security tab