Lexmark c912 Guia De Configuração Rápida
Loading paper
Your printer supports a wide variety of paper types, sizes,
and weights. The standard tray (tray 1) and optional trays 2,
3, and 4 are marked with stack height letters A, B, and C.
The optional heavy media tray is marked with stack height
letters D, E, and F.
and weights. The standard tray (tray 1) and optional trays 2,
3, and 4 are marked with stack height letters A, B, and C.
The optional heavy media tray is marked with stack height
letters D, E, and F.
The following table lists recommended media, weights, and
the stack height guide to use when loading the paper trays.
the stack height guide to use when loading the paper trays.
To help prevent jams:
•
Flex all stacks of
print media back
and forth to
loosen them, and
then fan them
before loading. Do not fold or crease the print media.
Straighten the edges of the stack on a level surface.
print media back
and forth to
loosen them, and
then fan them
before loading. Do not fold or crease the print media.
Straighten the edges of the stack on a level surface.
•
Do not exceed the maximum stack height. Overfilling
may cause jams.
may cause jams.
Loading a 550-sheet tray
Note:
If you are loading an optional heavy media
paper tray, make sure the paper size and type are set
for the print media you are loading. Refer to the
publications CD for instructions on setting the paper
size or paper type.
for the print media you are loading. Refer to the
publications CD for instructions on setting the paper
size or paper type.
1
Pull the paper tray
out until it stops.
out until it stops.
2
Press the metal
plate down until it
locks.
plate down until it
locks.
Stack
height
height
Recommended media
A
Lexmark Glossy Paper
*
: Letter (P/N 12A5950),
A4 (P/N 12A5951)
B
11x17, Legal, B4, A3 (90–105 g/m
2
, 24–28 lb bond)
C
Letter, A4 (60–105 g/m
2
, 16–28 lb bond), 11x17,
Legal, B4, A3 (60–90 g/m
2
, 16–24 lb bond)
D
Lexmark Transparency
**
: Letter (P/N 12A5940),
A4 (P/N
12A5941
)
E
Lexmark Glossy Paper
*
: Letter (P/N 12A5950),
A4 (P/N 12A5951)
Paper Labels: Letter, A4 (up to 180 g/m
2
, 48 lb bond)
F
Letter, A4 (105–128 g/m
2
, 28–34 lb bond)
*
Lexmark Glossy Paper is 120 g/m
2
, 80 lb. book, 32 lb bond.
**
Lexmark Transparency weight is 170 g/m
2
.
3
Squeeze the left
guide and slide it
to the position for
the size paper you
are loading.
guide and slide it
to the position for
the size paper you
are loading.
The position of the
left paper guide
tells the printer
the size of the
paper in the tray.
left paper guide
tells the printer
the size of the
paper in the tray.
4
Release the paper guide.
5
Flex the sheets back and forth to loosen them, and
then fan them.
then fan them.
6
Place the paper
in the tray, print
side down.
in the tray, print
side down.
7
Squeeze the front
paper guide lever
and slide the
guide until it
lightly touches
the stack of
paper.
paper guide lever
and slide the
guide until it
lightly touches
the stack of
paper.
8
Rotate the paper
size dial until you
see the correct
size of paper in
the window.
size dial until you
see the correct
size of paper in
the window.
9
Push in the tray
completely.
completely.
Loading the multipurpose feeder
Warning:
Feeding more than a single sheet of glossy
paper may damage the fuser.
paper may damage the fuser.
You can load up to 100 sheets of plain paper, 10 envelopes,
or one sheet of banner or glossy paper in the multipurpose
feeder. Refer to the publications CD or Setup Guide for
capacity limits for other print media.
or one sheet of banner or glossy paper in the multipurpose
feeder. Refer to the publications CD or Setup Guide for
capacity limits for other print media.
1
Open and extend
the multipurpose
feeder.
the multipurpose
feeder.
2
Slide the paper
guides to the
correct position
for the size paper
you are loading.
guides to the
correct position
for the size paper
you are loading.
3
Press the paper
feed plate down
until it locks into
place.
feed plate down
until it locks into
place.
4
Flex the sheets
back and forth to
loosen them, and
then fan them.
back and forth to
loosen them, and
then fan them.
5
Place the paper
print side up
between the
paper guides.
print side up
between the
paper guides.
6
Move the SET
button to the left to
unlock the tray.
button to the left to
unlock the tray.
Loading the high capacity feeder
Note:
Load only plain paper in the high capacity
feeder.
You can load up to 3,000 sheets of plain paper in the high
capacity feeder.
capacity feeder.
1
Open the top
cover.
cover.
2
Check the position
of the paper
guides.
of the paper
guides.
If the paper guide
arrows are
correctly aligned to
the size paper you
are loading, go to
step 6. If not,
continue with
step 3.
arrows are
correctly aligned to
the size paper you
are loading, go to
step 6. If not,
continue with
step 3.
3
Loosen the left and right paper guide thumbscrews.
4
Slide the guides
left or right to the
correct position for
the size paper you
are loading (A4 or
Letter).
left or right to the
correct position for
the size paper you
are loading (A4 or
Letter).
5
Tighten the left
and right paper
guide
thumbscrews.
and right paper
guide
thumbscrews.
6
Flex the sheets
back and forth to
loosen them, and then fan them.
back and forth to
loosen them, and then fan them.
7
Place the paper
against the paper
guides, with the
print side up.
against the paper
guides, with the
print side up.
Note:
If there is
only a partial stack
of paper in the tray,
the paper low
sensor will not
allow the tray to go
down. Add more
paper to lower the
tray.
of paper in the tray,
the paper low
sensor will not
allow the tray to go
down. Add more
paper to lower the
tray.
8
Press the paper
tray button.
tray button.
The paper tray
lowers so you can
load another 500
sheets of paper.
lowers so you can
load another 500
sheets of paper.
9
10
Close the top cover.