Lexmark W810 Guia Do Utilizador

Managing memory

On the Optra W810, the memory required to print a particular job is a complex function of 
the types of memory available, the printer settings selected, and the composition of the 
print job itself. The amount of printer memory installed and the attributes of the processor 
also affect print speed and performance.

Printer memory (SDRAM) for the Optra W810 is available in dual inline memory modules 
(DIMMs). The printer ships with either 16MB (soldered on the system board) or 32MB 
(16MB soldered on the system board and 16MB installed in one of the memory connec-
tors) of standard memory, depending on the printer model. To install the maximum mem-
ory supported (384MB), you must install a 128MB DIMM in each of the three memory 
connectors on the system board. Refer to the 

Setup Guide for instructions on installing 

memory.

Standard memory

16MB

16MB

32MB

Memory type

SDRAM

SDRAM

SDRAM

Additional memory 
connectors

3

3

2 

Note:  A 16MB DIMM 
is installed in one of 
the three connectors.

Optional memory

4MB, 8MB, 16MB, 
32MB, 64MB, 128MB

4MB, 8MB, 16MB, 
32MB, 64MB, 128MB

4MB, 8MB, 16MB, 
32MB, 64MB, 128MB