Lexmark W810 Guia Do Utilizador
Managing memory
171
Job buffering provides several advantages:
•
The printer can accept jobs sooner, which frees up the host system and the net-
work much quicker.
work much quicker.
•
The printer can accept jobs on all ports at the same time, as long as the job buffer-
ing partition on the disk is not filled to capacity.
ing partition on the disk is not filled to capacity.
•
The printer stays busy printing jobs stored on the disk after a host computer, net-
work connection, or print server goes down.
work connection, or print server goes down.
•
After a power loss, buffered jobs that were completely spooled to the hard disk
can resume printing without loss of data.
can resume printing without loss of data.
•
If the printer fails, you can remove the hard disk, install it in another printer, and
print the jobs that are stored on the disk.
print the jobs that are stored on the disk.
Creating a partition
Before you can enable job buffering, you must allocate a portion of the disk for job buffer-
ing. Creating a new partition formats the hard disk, erasing the contents of the disk. You
can create a job buffering partition through MarkVision or by selecting the Job Buffer Size
menu item from the Setup Menu on the operator panel. The partition can be 10% to 100%
of the disk, in 1% increments. The minimum recommended size of a job buffering partition
is 50MB, which is substantially less than 10% of the 2.1GB disk Lexmark offers.
ing. Creating a new partition formats the hard disk, erasing the contents of the disk. You
can create a job buffering partition through MarkVision or by selecting the Job Buffer Size
menu item from the Setup Menu on the operator panel. The partition can be 10% to 100%
of the disk, in 1% increments. The minimum recommended size of a job buffering partition
is 50MB, which is substantially less than 10% of the 2.1GB disk Lexmark offers.
Once you’ve created the job buffering partition, you cannot store forms, fonts, or macros
on that part of the disk. However, the rest of the disk is still available for storing resources.
on that part of the disk. However, the rest of the disk is still available for storing resources.
Enabling job buffering
Once you have created a job buffering partition, enable job buffering for each port. You
can use the operator panel or MarkVision to configure the printer for job buffering. You
must be a workgroup administrator to change job buffering settings in MarkVision.
can use the operator panel or MarkVision to configure the printer for job buffering. You
must be a workgroup administrator to change job buffering settings in MarkVision.
After enabling job buffering for a particular port, the printer resets.
To avoid problems with the print jobs as they come through the interface ports, we recom-
mend leaving the interface buffers (Parallel Buffer, Network Buffer, and so on) set to Auto
for all ports on which job buffering has been enabled. See the printer menus that start on
page 68 for more information on setting up job buffering for the different interface ports.
mend leaving the interface buffers (Parallel Buffer, Network Buffer, and so on) set to Auto
for all ports on which job buffering has been enabled. See the printer menus that start on
page 68 for more information on setting up job buffering for the different interface ports.