Lexmark W810 Guia Do Utilizador

Managing memory

Before downloading a file to flash memory or disk, you must first identify the device tar-
geted to receive the downloaded resources. This process of identifying the device target 
is sometimes referred to as Resource Data Collection mode. Any device you place into 
this mode becomes the target for all files supported by flash memory or disk that you 
download to the printer.

You can select the download target through the data stream, from MarkVision, or by using 
the operator panel. To use the operator panel, select the Download Target menu item 
from the Setup Menu. Selecting Flash or Disk places the device into Resource Data Col-
lection mode and prepares it to receive resources you want to download. 

After downloading resources, you must reset the Download Target to RAM. The printer 
does not write the files to the designated device until you complete this step. If you’re 
using MarkVision to download resources, MarkVision automatically resets the download 
target. 

To download files:

When the complete file is in printer memory, the printer determines the size of 
the file and the amount of memory required to store it on flash or disk. If there 
is not enough memory available on the device, no data is written and an error 
message is displayed. This ensures that no partial files are written to the 
device.

Type 3 fonts, however, are treated as normal PostScript programs and dictio-
naries. They are written directly to flash or disk using PostScript, without first 
checking for space on the device.