Lexmark W810 Guia Do Utilizador

Connectivity and network management

When the printer contains an optional SIMM for IPDS, it attaches to a network using one 
of the following MarkNet print servers:

MarkNet N2000 Series (Any microcode level is supported for the MarkNet 
N2000.)

MarkNet S (Microcode level 1.6.5 or later is required.)

MarkNet Pro (Microcode level 2.9.15 or later is required.)

The IBM host software requirements for AFP/IPDS printing when the printer is emulating 
an IBM 381x, 43xx, 311x, or 4028 printer are:

Print Services Facility (PSF)/MVS version 2.2 or later

Application System (AS)/400 Operating System (OS)/400 V3R2, V3R1, V3R6, 
V3R7, V4R1, V4R2, V4R3 or later through PSF/400 

Note: With AS/400 OS/400 V3R1 or OS/400 V3R6, to print IPDS over TCP/IP 

through PSF/400, PTF SF29249 - WRKAFP2 is required.  

PSF for OS/2 (PSF/2) 2.0 or later

PSF for AIX (PSF/6000) 2.1 or later

When the printer contains an optional SIMM for IPDS and the Coax/Twinax Adapter for 
SCS with a twinaxial cable, the printer attaches to the following IBM hardware: 

AS/400e servers and e-systems

AS/400 Twinaxial Workstation Controllers

AS/400 Advanced System/36 Twinaxial Workstation Controller

5494 Remote Control Unit 

5394 Remote Control Unit

Note: Two separate twinax addresses, one for the SCS adapter and another for 

the SIMM for IPDS, are required.