Lexmark W810 Guia Do Utilizador

Changing printer settings

Use the Serial Menu to change settings affecting jobs sent to the printer through the serial 
interface port. The Serial Menu is only displayed when a serial interface port is installed in 
the printer. You must first select Serial Opt 

x

before selecting from the following menu 

items.

Parallel Mode 1

= Off*
= On

The Parallel Mode 1 setting controls the pull up resistors on the 
parallel port signals. It is useful for personal computers that 
have open collector outputs on the parallel port signals.

Set Parallel Mode 1 to On to disable the resistors or to Off to 
enable the resistors.

Parallel Mode 2

= Off
= On*

The Parallel Mode 2 setting determines whether the parallel 
port data is sampled on the leading or trailing edge of strobe.

If Parallel Mode 2 is set to On, the parallel port data is sampled 
on the leading edge of strobe.

If Parallel Mode 2 is set to Off, the parallel port data is sampled 
on the trailing edge of strobe.

PCL SmartSwitch

= Off
= On*

If PCL SmartSwitch is set to On, the printer examines the data 
on the serial interface connection and selects PCL emulation if 
the data indicates that is the printer language.

If both PCL SmartSwitch and PS SmartSwitch are set to Off, 
the printer uses the language specified in the Printer Language 
menu as the default. If only one SmartSwitch setting is set to 
On, the printer uses that language as the default.

* Factory default

* Factory default