Lexmark 2400 Cartão De Referência Rápida
15
Top-Of-Form
Setting Top-Of-Form for continuous form paper
in push mode
in push mode
Top-Of-Form can range from minus 1 inch to plus 14 inches from the top of
continuous form paper.
continuous form paper.
Note:
Use this method to also set Top-Of-Form for continuous
forms loaded in the optional Tractor 2 Feeder.
forms loaded in the optional Tractor 2 Feeder.
1
Clear the paper path.
If the Paper Out light is Off, tear off excess forms and press Load/Unload.
Press FormFeed to clear a cut sheet.
2
Move the paper select lever to continuous forms
.
3
Load continuous form paper on the push tractor feed pins (or Tractor 2
feed pins if you are using the optional Tractor 2 Feeder).
feed pins if you are using the optional Tractor 2 Feeder).
4
Remove the ribbon access cover.
5
Press Load/Unload. The Paper Out light goes Off.