Fujifilm s5100 Manual Do Utilizador

115

114

Digital camera FinePix S5100/FinePix S5500

4.0 million pixels

1/2.7 inch square pixel CCD
Number of total pixels: 4.23 million pixels

Still image: 2272 

× 1704 pixels/1600 × 1200 pixels/1280 × 960 pixels/ 

640 

× 480 pixels (

4

/

2

/

1

/

`

)

Movie: 640 

× 480 pixels (30 frames per second with monaural sound)

320 

× 240 pixels (30 frames per second with monaural sound)

xD-Picture Card (16/32/64/128/256/512 MB)

Still image: Compressed: JPEG (Exif ver. 2.2)

Uncompressed: CCD-RAW (RAF)

✽ Design rule for Camera File System compliant DPOF compatible

Movie: AVI format, Motion JPEG
Audio: WAVE format, Monaural sound

Fujinon 10

× optical zoom lens, F2.8-F3.1

F2.8-F8 10 steps at wide-angle/F3.1-F9 10 steps at telephoto in 1/3 EV increments
Manual/Auto selectable

f=5.7 mm to 57 mm
(Equivalent to 37 mm to 370 mm on a 35 mm camera)

2

: approx. 1.4

× /

1

: approx. 1.8

× /

`

: approx. 3.6

×

(10

× optical zoom lens is used together: Max. zoom scale: 35.5×)

Normal: Wide-angle: Approx. 90 cm (3.0 ft.) to infinity

Telephoto: Approx. 2.0 m (6.6 ft.) to infinity

Macro: Wide-angle: Approx. 10 cm to 2.0 m (3.9 in. to 6.6 ft.)

Telephoto: Approx. 90 cm to 2.0 m (3.0 ft. to 6.6 ft.)

B

/

m

/

,

/

.

/

N

: 1/4 sec. to 1/2000 sec. 

/

/

M

: 3 sec. to 1/1000 sec. 

<

: 1/4 sec. to 1/1000 sec. 

>

: 15 sec. to 1/2000 sec.

TTL contrast-type, Auto focus, Manual focus

B

: AUTO (Equivalent to ISO 64 to 320, depending on coditions) 64/100/200/400

m

/

,

/

.

/

/

/

N

/

M

/

<

/

>

: Equivalent to ISO 64/100/200/400

(During setting CCD-RAW: ISO 64/100/200)

TTL 64-zones metering Multi, Spot, Average

Program AE (

B

,

N

,

m

,

,

,

.

,

/

), Shutter-priority AE, Aperture-priority AE,

Manual exposure

–2.0 EV to +2.0 EV in 1/3 EV step increments 
(in Programmed auto, shutter-priority auto, Aperture-priority auto)

Auto (

B

,

m

,

,

,

.

,

/

)

Manual modes, 8 positions can be selected (

N

,

M

,

<

, 

>

)

0.33 inches, 115,000 pixels electronic viewfinder, Approx. 100% coverage 

1.5 inches, low-temperature polysilicon TFT 115,000 pixels, 
Approx. 100% coverage

Auto flash using flash control sensor
Effective range: Wide-angle: Approx. 30 cm to 5.0 m (1.0 ft. to 16.4 ft.) 

(Approx. 30 cm to 2.0 m (1.0 ft. to 6.6 ft.): Macro)

Telephoto: Approx. 80 cm to 4.5 m (2.6 ft. to 14.8 ft.)

Flash modes: Auto, Red-eye reduction, Forced flash, Suppressed flash, Slow

synchro, Red-eye reduction + Slow synchro

Approx. 2 sec./10 sec.

Top 3-frame:

Number of recorded frames: up to 3 frames
(at intervals as short as approx. 0.3 sec.)

Final 3-frame: Number of recorded frames:

last 3 frames before releasing the shutter button
(at intervals as short as approx. 0.3 sec.)

Long-period continuous shooting

Number of recorded frames: up to 40 frames
(at intervals as short as approx. 0.6 sec.)

Best framing, Frame No. memory

Trimming, Automatic playback, Multi-frame playback, Voice memo

PictBridge, Language (

, English, Francais, Deutsch, Español, Italiano, 

),

FinePix photo mode (

p

-mode), WEB camera, Discharge batteries

NTSC/PAL selectable

eIf you think the camera is faulty, check the following once more.

Frame erase does not
erase the frame.

The ERASE ALL
function does not erase
all the frames.

Screens are not
displayed in English.

There is no image or
sound on the TV.

The TV image is black
and white.

When the camera is
connected to a PC, the
photographed image or
playback image appears
on the camera’s screen.

Nothing happens when I
use the Mode dial.

The camera no longer
works correctly.

Can’t print with
PictBridge.

The camera was
connected to a PC
when the USB mode
was set to “

®

”.

Some frames may be protected.

A language other than English is selected in
the “

” setting in the “SET-UP”

menu (

➡P.81).

i The camera is not connected to the TV

correctly.

i “TV” is selected as the TV input.
i The video output setting is incorrect.

The video output setting is incorrect.

i The USB cable (mini-B) is not correctly

connected to the PC or camera.

i The PC is not turned on.

i Camera malfunction.

i The batteries have run out.

The camera has suffered an unforeseen
problem.

“

®

” is not selected in USB mode in the

“SET-UP” menu.

Unprotect frames using the camera on
which the protection was first applied.

1Press the “MENU/OK” button to display

the menu.

2Press “d” or “c” to select “

F

” and press

“a” or “b” to select “SET-UP”. Press the
“MENU/OK” button to display the SET-UP
screen on the screen.

3Press “d” or “c” to move to option 4 and

then press “a ” or “b ” to select
“

”.

4Press “d” or “c” several times to select

“ENGLISH”.

5Press the “MENU/OK” button.

i Connect the camera and TV correctly.

i Set the TV input to “VIDEO”.
i Change the setting to “NTSC” or “PAL”

(

➡P.81).

Change the setting to “NTSC” or “PAL”
(

➡P.81)

i Set up the camera and the USB cable

(mini-B) correctly.

i Turn the PC on.

i Briefly remove the batteries or disconnect

the AC power adapter. Then reload the
battery or reconnect the AC power adapter
and try again.

i Load new or fully charged batteries.

Briefly remove the batteries or disconnect
the AC power adapter. Then reload the
batteries or reconnect the AC power adapter
and try again. If the message still appears,
contact your FUJIFILM dealer.

Select “

®

” in USB mode in the “SET-UP”

menu.

Perform steps 1 to  3 to remove the
camera from the PC.
h Windows
1 The “New Hardware Found” wizard (or

“Scanner and Camera” wizard) appears.
If the wizard does not appear, proceed to
step 3.

2 Click the [Cancel] button.
3 Disconnect the camera from the PC.
h Macintosh
1 The window for locating the driver

appears. If the window does not appear,
proceed to step 3.

2 Click the [Cancel] button.
3 Disconnect the camera from the

Macintosh.