Fujifilm s602 Manual Do Utilizador

84

e

The table below lists the warnings that are displayed on the LCD monitor

The camera batteries are low
on charge.

No media is inserted.

i

The media is not formatted
(initialized).

i

The SmartMedia contact area
(gold-colored area) is dirty.

i

The camera is faulty.

i

The SmartMedia is not loaded
correctly.

i

The SmartMedia contact area
(gold-colored area) is dirty.

i

The media is damaged.

i

The media format is incorrect.

i

The camera is faulty.

The media is full and no further
data can be recorded.

The SmartMedia is write-
protected.

Have spare batteries ready or replace the
batteries.

i

Load a SmartMedia (3.3V) in the correct
direction.

i

Load a Microdrive in the correct direction.

i

Format the media.

i

Wipe the SmartMedia contact area with a
soft, dry cloth. It may also be necessary to
format the SmartMedia. If an error message
still appears, replace the SmartMedia.

i

Contact your FUJIFILM dealer.

i

Push the SmartMedia all the way into the
slot and check that it is locked into place.

i

Wipe the SmartMedia contact area with a
soft, dry cloth. It may also be necessary to
format the SmartMedia. If an error message
still appears, replace the SmartMedia.

i

Contact your FUJIFILM dealer.

Use a SmartMedia that is not write-protected.

Erase some images or use a media that has
some available space.

The AF (auto focus) doesn’t
work very well.

i

If the subject is too dark, take the shot at a
distance of roughly 2 meters from the subject.

i

Use AF lock to take the picture.

i

Data cannot be recorded due
to a media fault or a problem
with the connection between
the media and the camera.

i

The image you just shot is too
large to fit in the space
available on the media.

i

Reload the media or switch the camera off
and then on again. If this does not remedy
the problem, contact your FUJIFILM dealer.

i

Use a new media.

ＦＩＬＥ ＮＯ．ＦＵＬＬ

Frame number 999-9999 has
been reached.

Use a formatted SmartMedia to take pictures.

i

You attempted to play back
file that was not recorded
correctly.

i

The SmartMedia contact area
(gold-colored area) is dirty.

i

The camera is faulty.

i

You attempted to play back a
voice file that was recorded
on a FinePix 50i.

i

That data cannot be played back.

i

Wipe the SmartMedia contact area with a
soft, dry cloth. It may also be necessary to
format the SmartMedia. If an error message
still appears, replace the SmartMedia.

i

Contact your FUJIFILM dealer.

i

That data cannot be played back.

X
C

(Lit red)

(Blinking red)

\

ＰＲＯＴＥＣＴＥＤ ＦＲＡＭＥ

i

The voice memo file is faulty.

i

The camera is faulty.

There is a strong likelihood of
camera shake because the
shutter speed is slow.

You attempted to erase a
protected frame.

Use flash photography. However, a tripod
should be used for some scenes and modes.

Protected frames cannot be erased. Remove
the protection using the camera on which the
protection was applied.

i

The voice memo cannot be played back.

i

Contact your FUJIFILM dealer.

Outside the AE continuous
range.

The shot can be taken, but the exposure will
not be correct.

(Lit red)