Fujifilm S3000 Guia Do Utilizador

◆

◆

Changes the focal length by a factor of 0.79

×

(wide-angle: equivalent to 30 mm) without altering
the F-stop value of the lens.
h

Magnification

: 0.79

×

Lens configuration : 3 lenses in 3 groups
Dimensions

: 32  mm  (1.26 in.) 

× 70 mm

(2.76 in.) dia.

Mass (Weight)

: Approx. 185 g (6.5 oz.)

Accessories

: Adapter Ring AR-FX9, Lens

caps (front and rear), Lens
pouch

●

Only use the wide conversion lens at the wide-
angle zoom setting.

●

The wide conversion lens and built-in flash
cannot be used together.

Changes the focal length by a factor of 1.5

×

(telephoto: equivalent to 340 mm) without altering
the F-stop value of the lens.

h

Magnification

: 1.5

×

Lens configuration : 3 lenses in 3 groups
Dimensions

: 55  mm  (2.17 in.) 

× 65 mm

(2.56 in.) dia. 

Mass (Weight)

: Approx. 100 g (3.5 oz.)

Accessories

: Adapter Ring AR-FX9, Lens

caps (front and rear), Lens
pouch

●

The TL-FX9/TL-FX9B should only be used for
telephoto shots where eclipsing does not occur.
Eclipsing occurs at wide-angle settings.

●

The built-in flash
cannot be used with
the teleconversion
lens.

●

Commercially available filters can be mounted on the lens when the adapter ring is attached, but no more than
one filter should be mounted at a time.

●

The adapter ring enclosed with the FinePix S3000(AR-FX3) should be used with these conversion lenses.
The adapter rings provided with these conversion lenses (AR-FX9 for FinePix 4900 zoom/6900 zoom/S602
zoom/S7000) cannot be used with the FinePix S3000.

Screw the adapter ring in the direction of the
arrow to mount it on the camera.

1 To prevent the lens cap from appearing in the

shot when you take pictures, attach the lens
cap to the strap.

2 Fit and remove the lens cap by squeezing the

left and right sides of the cap.

Mounting the adapter ring on the camera
protects the lens and allows you to attach the
optional conversion lens. The adapter ring
should be mounted on the camera at all times to
protect the lens.

0

1

0

2