Fujifilm F700 Guia Do Utilizador

17

16

Just by putting the camera in the cradle, you can ensure that your camera is always  charged. The
cradle will also automatically launch the “FinePixViewer” image viewing software when you switch
the cradle on. You can then display thumbnail lists of your photographed images on your computer
for quick and easy downloading.

Connect the AC power adapter, Special A/V cable
or special USB cable to the cradle.
Always use the AC power adapter. Connect the
Special A/V cable and special USB cable as required.
When you are viewing images on a TV, either
disconnect the special USB cable from the cradle to
ensure that the camera is not connected to your
computer, or switch your computer off.
To view images on a TV, use the special A/V cable,
not the special USB cable.

Plug the AC power adapter into a power socket.

Push the plug firmly all the way into the USB
socket, taking care to plug the correct end of the
cable into the socket.

Always switch the camera off before placing it in
the cradle.

●

Taking care to plug the correct end of the cable into the USB
port, push the plug firmly all the way into the socket.

●

Fit the camera firmly onto the cradle connection terminal.

Charging starts when you put a camera containing
battery into the cradle. The camera’s self timer lamp
lights (Red) during charging and goes off when
charging is complete. A fully discharged battery
takes roughly 2 hours to fully recharge (at an
ambient temperature of 23°C±2°C/73.4°F±35.6°F).

●

When you put a camera containing charged battery into the
cradle, the camera’s self timer lamp lights briefly and then
switches off.

Pressing the power switch on the cradle switches
the camera on. This initiates the connection to the
computer.
See P.83 for details.

●

Install the software first.
Before you connect the cradle to your computer, refer to
section 5 of the Owner’s Manual.

■ The POWER lamps on the cradle

Off

Lit

Off

Camera switched off, Battery charging complete.

Lit

Camera switched off, Battery charging in progress.

Flashing

Camera switched on, Exchanging data with the computer.

Off

Camera switched on. Standby.

◆

◆

Check that the camera is switched off and then grip
the cradle and take the camera out.

<When viewing images on a TV>
Press the power button to turn the cradle off before
removing the camera.
<If the cradle is connected to a computer>
You must shutdown your computer before removing
the camera from the cradle. See P.87 for details.

◆

◆

<Special A/V cable>
Plug the audio input connector (white) and video
input connector (yellow) into the matching white and
yellow sockets on the TV.

<Viewing images on a TV>
When you connect the bundled special A/V cable to
the camera and press the POWER switch, the
camera switches on. Switch the TV to video input
mode.

When using the screw in the base to mount the cradle on a tripod, take care to ensure that the
cradle does not fall or tip over.