Fujitsu T4220 Manual Suplementar

severe, it will give you an opportunity to modify the 
setup utility settings, as described in the following steps:

1. When you turn on or restart the computer there is a 

beep and/or the following message appears on the 
screen:

Error message - please run SETUP 

program Press <F1> key to continue, 

<F2> to run SETUP

2. If an error message is displayed on the screen, and 

you want to continue with the boot process and start 

the operating system anyway, press the [F1] key.

3. If an error message is displayed on the screen, and 

you want to enter the setup utility, press the [F2] key.

4. When the setup utility starts with a fault present, the 

system displays the following message:

Warning!

Error message

[Continue]

5. Press any key to enter the setup utility. The system 

will then display the Info Menu with current param-
eters values.

■

If your notebook emits a series of beeps 
that sounds like a code and the display is 
blank, please refer to the Troubleshoot-
ing Section in the system User’s Guide. 
The Troubleshooting Section includes a 
list of error messages and their meanings.

■

If your data security settings require it, 
you may be asked for a password before 
the operating system will be opened.