Fujitsu M4099D Guia De Referência
2-6
WARNING
Wait at least 3 minutes after turning off the power before cleaning.
ACHTUNG
Warten Sie nach dem Reinigen mindestens 3 Minuten bevor Sie den
Scanner wieder anschalten.
Scanner wieder anschalten.
■
Cleaning the Transport Path
Wipe the transport path with a dry
cloth or soaked in isopropyl
alcohol or cleaner F1.
cloth or soaked in isopropyl
alcohol or cleaner F1.
Open the upper transport unit.
Transport Path,
Discharge Brush,
and Glass Surface
Discharge Brush,
and Glass Surface
NOTE
Use a vacuum cleaner to remove paper dust
from the transport path.
from the transport path.
■
Cleaning the Discharge Brush
Open the upper transport unit.
Release the ADF release lever
and rest the ADF sheet guide
assembly on the ADF release
lever.
and rest the ADF sheet guide
assembly on the ADF release
lever.
While pulling the ADF release
lever toward you, hold up the ADF
sheet guide assembly.
lever toward you, hold up the ADF
sheet guide assembly.
CAUTION
Never close the upper transport unit in this
condition. Doing so will cause severe
damage to the scanner.
condition. Doing so will cause severe
damage to the scanner.
Pick roller unit
ADF release levers