Fujitsu pds4221 Manual Do Utilizador

POWER

1 Power indicator lamp

This lamp shows whether the main power is ON or OFF, as
follows:

Lit (red):

Standby

Lit (green):

Power ON

Lit (orange):

Power saving (DPMS: Power saving
function) mode ON

Flashing (red): Malfunction (Flashes differently depending

on the type of malfunction.  See P. E-6 for
more information.)

2 Remote control signal receiver

Receives signals from the remote control.

3 Main Power Switch Indicator

Indicates the location of the Main Power switch, at the bottom
of the display.

The protective circuit built into the display automatically turns the power to OFF if the display has an internal problem.  At this time, the
power indicator blinks red, indicating that the display is somehow faulty.  If you continue using the display as is, fire or electric shock may
result.  Be sure to first remove the power plug from the receptacle and to contact your dealer immediately.

2

3

4

5 6

7

8

9

0

1

The control panel opens when you press the lower center of the
display.

If you press the display again, the control panel closes.

4 Power button [POWER]

Turns the power ON or OFF when the main power switch,

provided at the bottom of the display, is ON.

5 Input mode selector button [MODE]

Switches between image input modes.

6 Wide screen selector button [WIDE]

Switches the screen over to a desired wide screen.

7 Menu button [MENU]

Displays image and sound adjustment menus.

8 Volume adjustment buttons [VOLUME -/+]

Adjust the volume.

Note:  The [

 / 

] buttons can also be used to scroll through

the options when a menu is displayed.

9 Adjustment buttons [  /  ]

The [  /  ] buttons can also be used to scroll through options
in a menu, or to change values.

0 Set button [ENTER]

Press this button to finalize the selection of a desired option in
a menu.