Fujitsu S510 Guia De Configuração Rápida
2.
Ope
doc
doc
3.
onto the ScanSnap.
black and white as the
leading edge as shown in
the right figure.
leading edge as shown in
the right figure.
When the Carrier Sheet is
used for scanning,
e
4
n.
n the Carrier Sheet and place the folded
ument inside.
Align the fold with the right
edge of the Carrier Sheet
so that the document fits
into the Carrier Sheet at
the upper corner.
edge of the Carrier Sheet
so that the document fits
into the Carrier Sheet at
the upper corner.
Load the Carrier Sheet
Load the Carrier Sheet
with the portion striped in
with the portion striped in
continuous scanning is
not possible. Scan one
piece or one sheet at on
time.
not possible. Scan one
piece or one sheet at on
time.
.
Press the [SCAN] butto
The front and back
images are merged into
a double-page spread
image.
a double-page spread
image.
HINT
settings
scanned. Re
Operator’s Gui
scanned. Re
Operator’s Gui
” for
The loading method and ScanSnap Manager’s
differ according to the documents to be
fer to “ScanSnap S510
de” on the “ScanSnap Setup
CD-ROM
details.
3.4.2. Scanning irregular-shaped Documents
This section exp
difficult to scan
difficult to scan
1.
Right-click
taskbar and
taskbar and
The "ScanSnap Manager - Scan and Save Settings"
dialog box appears.
2.
On the [Paper size] tab, click the
"
Carrier Sheet
Settings…
"
button.
The "Carrier Sheet Settings" dialog box appears.
3.
On the "Carrier Sheet Settings" window, select
"Create front and back images separately" in the
"Create front and back images separately" in the
bu
5.
onto the ScanSnap.
n striped
in black and white as the
leading edge as shown
in the right figure.
leading edge as shown
in the right figure.
When the Carrier Sheet
is used for scanning,
continuous scanning is
continuous scanning is
6.
P
n.
ut in the specified size.
lains how to scan documents that are
as it is.
the ScanSnap Manager icon
on the
select [Settings…].
"Mode" drop-down list, and then click the [OK]
tton.
4.
Open the Carrier Sheet and place the document
inside.
inside.
Neatly align the top of the
material with the top of the
Carrier Sheet. Center the
material so that it is
entirely contained in the
Carrier Sheet.
material with the top of the
Carrier Sheet. Center the
material so that it is
entirely contained in the
Carrier Sheet.
Load the Carrier Sheet
Load the Carrier Sheet
with the portio
with the portio
not possible. Scan one
piece or one sheet at
one time.
piece or one sheet at
one time.
ress the [SCAN] butto
Scanning starts.
The image is centered and outp
The loading method and ScanSnap Manager’s
settings differ according to the documents to be
scanned. Refer to “ScanSnap S510
Operator’s Guide” on the “ScanSnap Setup
CD-ROM” for details.
settings differ according to the documents to be
scanned. Refer to “ScanSnap S510
Operator’s Guide” on the “ScanSnap Setup
CD-ROM” for details.
HINT
3.5
1.
From the [S
[CardMind
After Card
CardMinde
front.)
[CardMind
After Card
CardMinde
front.)
. Scanning Business Cards
tart] menu, select [All Programs]
er] [CardMinder].
Minder is started, make sure that
r is active (its window is brought to the
HINT
[Application] and [Scanning] tabs ar
enabled.
enabled.
● When “CardMinder” is selected, only the
e
ore about the settings.
● Refer to the “ScanSnap S510 Operator’s
Guide” on the “ScanSnap Setup
CD-ROM” to learn m
CD-ROM” to learn m
2.
Load the business cards onto the scanner. Adjust the
side guides to the business card width.
side guides to the business card width.
S
Side guide
[SCAN] button
Business card
(Set it face down)
(Set it face down)
14