Fujitsu S510 Guia De Configuração Rápida
Turn off the scanner before cleaning the
following locations.
following locations.
Clea the Pad ASSY downward. When cleaning the
to prevent the cloth from
parts.
G
posite side)
Clean lightly.
takin
t to scratch
age
of
a
g the P
k
the roller
Pad ASSY (x1)
n
Pad ASSY, take care
catching on the metal
catching on the metal
lass
(x2 on the ADF and the op
Pick roller (x1)
Clean lightly
g care no
and dam
the surface
cleanin
cleanin
the roller. Take p
ick roller as blac
rticular care in
debris on
adversely affects the pickup performance.
Plastic rollers (x4 on the ADF cover)
Clean them lightly while rotating the rollers with
your fingers. Take care not to roughen the surface of
the rollers. Take particular care in cleaning the
plastic rollers, as black debris on the rollers
adversely affects the pickup performance.
your fingers. Take care not to roughen the surface of
the rollers. Take particular care in cleaning the
plastic rollers, as black debris on the rollers
adversely affects the pickup performance.
Turn on the scanner before cleaning the
following locations. Clean the following rollers,
while rotating them.
following locations. Clean the following rollers,
while rotating them.
Fee rolle
Clean
the sur
cleani
rollers ad
the sur
cleani
rollers ad
Eject rollers (x2)
Connect the
only when c
only when c
AC adapter and AC cable
leaning the Feed rollers and
the Eject rollers.
3.
Close the ADF.
d
rs (x2)
the rollers lightly taking care not to roughen
face of the rollers. Take particular care in
ng the feed rollers, as black debris on the
versely affects the pickup performance.
Clean the rollers lightly taking care not to roughen
the surface of the rollers.
Take particular care in cleaning the eject rollers, as
black debris on the rollers adversely affects the
pickup performance.
the surface of the rollers.
Take particular care in cleaning the eject rollers, as
black debris on the rollers adversely affects the
pickup performance.
To rotate the feed rollers and the eject rollers, press
the [POWER] button while holding down the [SCAN]
button.
As a guideline, six presses of the [POWER] button
and [SCAN] button simultaneously make the rollers to
rotate one full turn.
the [POWER] button while holding down the [SCAN]
button.
As a guideline, six presses of the [POWER] button
and [SCAN] button simultaneously make the rollers to
rotate one full turn.
When you closed the ADF, make sure that it
is completely closed. Otherwise, paper jams
or other feeding troubles may occur.
is completely closed. Otherwise, paper jams
or other feeding troubles may occur.
5.4. Cleaning the Carrier Sheet
If the Carrier Sheet is used extensively, dirt and dust may
stick onto the surface or the interior and cause scanning
errors. Clean it regularly.
stick onto the surface or the interior and cause scanning
errors. Clean it regularly.
Use a
a soft cloth slightly moistened with
Clean
Sheet.
<Cleaning method>
dry, soft cloth, or
er F1 or a mild detergent to lightly clean off the dirt
and dust from the surface and the interior of the Carrier
●
Never use paint thinner or other organic
solvents.
solvents.
●
Do not rub too hard. Otherwise, the Carrier
Sheet may be scratched or be deformed.
Sheet may be scratched or be deformed.
●
After cleaning the interior of the Carrier
Sheet with Cleaner F1 or a mild detergent,
dry the Carrier Sheet completely before
closing it.
Sheet with Cleaner F1 or a mild detergent,
dry the Carrier Sheet completely before
closing it.
●
As a guideline, it is recommended to replace
the Carrier Sheet every 500 scans.
the Carrier Sheet every 500 scans.
Refer to "6.4. Purchasing the Carrier
Sheet" for details on purchasing a Carrier
Sheet.
Sheet" for details on purchasing a Carrier
Sheet.
ADF
スキャン
e-
スキャン
While holding down
the [SCAN]
button…
button…
…press the
[POWER] button.
22