Fujitsu S500 Guia Do Utilizador

18 | 

 

 

This chapter describes how to clean the ScanSnap scanner. 

Before cleaning the scanner, disconnect the AC 
adapter from the power outlet. 
 

5.1. Cleaning Materials 

Cleaning Materials 

Parts No. 

Remarks 

Cleaner F1

CA99501-0013 

1 bottle (100ml) 
Moisten cloth with this fluid 
and wipe the scanner clean. 
(*1) 

*1) To purchase the cleaning material, contact the FUJITSU 

scanner dealer where you purchased the scanner. 

Clean the scanner exterior and the Paper chute cover with a 
dry cloth or a cloth moistened with a small amount of 
neutral detergent or Cleaner F1 (sold separately). 

 

●  Never use paint thinner or other organic 

solvents.

 

●  During the cleaning, take care not to let 

water or other moistures getting into the 
inside of the scanner.

 

●  Do not use aerosol sprays to clean the 

scanner. Aerosol sprays cause dirt and 
dust entering the scanner, resulting in 
scanner failure and scanner malfunction.

 

 

Clean inside of the scanner with a cloth moistened with 
cleaner F1. 
In an alternating succession of scanning documents, the 
accumulated paper-powder and dust inside the scanner 
causes a scanning error. 
As a guideline, clean the ADF every 1,000 scans. Note that 
this guideline varies according to the type of document you 
are scanning. For example, the ADF has to be cleaned 
more frequently when scanning photocopied documents on 
that the toner has not been sufficiently fixed on. 
Clean the ADF according to the following procedure 
referring to the illustrations. 

CAUTION

 

The glass surface inside the ADF becomes hot during 
the scanner operation. 
Before you start cleaning the inside of the scanner, 
disconnect the AC adapter from the outlet, and wait at 
least 15 minutes to let the scanner cool down. 

 

 

●  Never use water or neutral detergent to 

clean the inside of the scanner.

 

●  Do not use aerosol sprays to clean the 

scanner. Aerosol sprays cause dirt and 
dust entering the scanner, resulting in the 
scanner failure, malfunction and image 
error.

 

1. 

Open the ADF cover while pulling the Cover open 
lever. 

 

2. 

Clean the following locations with a cloth moistened 
with the Cleaner F1. 

 

Cover open lever 

ADF cover 

Plastic rollers (x4) 

Pad ASSY

Glass (x2) 

(Located on the ADF cover and opposite side.) 

Eject rollers (x2) 

Pick roller 

Feed rollers 
(x2)

 

Cloth 

Neutral detergent 

or Cleaner F1 

Paint thinner