Toshiba 24SL410U Guia Do Utilizador

Página de 62
13
Overview of cable types
Cables can be purchased from most stores that sell 
audio/video devices. Before purchasing any cables, 
be sure of connector types required by your devices 
and the length of each cable.
Coaxial (F-type) cable
Coaxial (F-type) cable is used for connecting your 
antenna, cable TV service, and/or cable converter box 
to the ANT/CABLE input on your TV.
Standard A/V cables (red/white/yellow)
Standard A/V cables (composite video) usually come 
in sets of three, and are for use with video devices 
with analog audio and composite video output. These 
cables (and the related inputs on your TV) are 
typically color-coded according to use: yellow for 
video, red for stereo right audio, and white for stereo 
left (or mono) audio.
Component video cables (red/green/blue)
Component video cables come in sets of three and are 
for use with video devices with component video 
output. (ColorStream
®
 is Toshiba’s brand of 
component video.) These cables are typically color-
coded red, green, and blue. Separate audio cables are 
required for a complete connection.
Note: Component video cables provide better 
picture performance than a standard 
(composite) video.
HDMI
®
 cable 
(with HDMI Logo “
“)
HDMI (High-Definition Multimedia Interface) cable 
is for use with devices with an HDMI output. An 
HDMI cable delivers digital audio and video in its 
native format. This cable carries both video and audio 
information; therefore, separate audio cables are not 
required for a complete HDMI device connection (
 
page 16 and page 19).
Note: An HDMI cable provides the best audio 
and picture performance. 
Optical audio cable
Optical audio cable is for connecting receivers with 
Dolby Digital or PCM (pulse-code modulation) 
optical audio input to the TV’s DIGITAL AUDIO OUT 
terminal (
Analog RGB (15-pin) computer cable
Analog RGB (15-pin) computer cable is for 
connecting a PC to the TV’s RGB/PC IN terminal (
 
page 19).
Note: Separate audio cables are required for a 
complete connection.
3.5mm Stereo to RCA Y-cable
3.5mm Stereo to RCA Y-Cable is for connecting 
audio signal from DVI device to TV.
About the connection illustrations
You can connect different types and brands of devices 
to your TV in several different configurations. The 
connection illustrations in this manual are 
representative of typical device connections only. The 
input/output terminals on your devices may differ 
from those illustrated herein. For details on 
connecting and using your specific devices, refer to 
each device’s owner’s manual.
Chapter 2: Connecting your TV