Nokia 8850 Manual Suplementar
AT Command Set for Nokia 8850
13
Copyright © 2000. Nokia Mobile Phones. All rights reserved.
<satype>: type of subaddress octet in integer format (GSM 04.08, subclause
10.5.4.8); default 128
10.5.4.8); default 128
<classx> is a sum of integers each representing a class of information (default 7
equals to all classes):
equals to all classes):
1
voice
2
data
4
fax
also all other values below 128 are reserved
<time>: 1...30 when "no reply" is enabled or queried, this gives the time in seconds
to wait before call is forwarded, default value 20
to wait before call is forwarded, default value 20
<status>:
0
not active
1
active
+CCWA Call Waiting
Controls call waiting supplementary service and presentation of +CCWA unsolicited
result code. When status request response from network indicates that SS is active
for specific data bearer services (e.g. 'circuit async'), AT interface shall only indicate
'data' (=2) ('not active' case is displayed only when SS is not active to any service;
i.e. +CCWA: 0,7). (GSM 07.07 section 7.11. )
result code. When status request response from network indicates that SS is active
for specific data bearer services (e.g. 'circuit async'), AT interface shall only indicate
'data' (=2) ('not active' case is displayed only when SS is not active to any service;
i.e. +CCWA: 0,7). (GSM 07.07 section 7.11. )
Syntax:
AT+CCWA=<n>,
<mode>,<class>
<mode>,<class>
When <mode>=2: the response is
+CCWA: <status>,<class1>
[<CR><LF>+CCWA: <status>,<class2>
[...]] The default option is 0[,,7].
+CCWA: <status>,<class1>
[<CR><LF>+CCWA: <status>,<class2>
[...]] The default option is 0[,,7].
AT+CCWA?
Query current setting.
Response is +CCWA:<n>
Response is +CCWA:<n>
AT+CCWA=?
Show supported values.
Response is +CCWA:(list of supported
<n>'s).
Response is +CCWA:(list of supported
<n>'s).
Parameters:
<n>
(sets/shows the result code presentation
status in the TA):
status in the TA):
0
disable
1
enable
<mode>
(when <mode> parameter is not given,
network is not interrogated):
network is not interrogated):
0
disable
1
enable
2
query status
<classx>
is a sum of integers each representing a
class of information (default 7 equals to all
classes):
class of information (default 7 equals to all
classes):
1
voice
2
data
4
fax
also all other values below 128 are
reserved
<status>:
0
reserved
<status>:
0
not active
1
active