Nokia 8850 Manual Suplementar

AT Command Set for Nokia 8850

<classx>:

is a sum of integers each representing a
class of information (default 7 equals to all
classes):

voice

data

fax

also all other values below 128 are
reserved

+CLIP Calling Line Identification Presentation

Controls presentation of +CLIP unsolicited result code or returns CLIP subscription
status from network. If product does not support network status query, <m> shall
always equal 2. (GSM 07.07 section 7.6.)

Syntax:

AT+CLIP=<n>

The default option is 0.

AT+CLIP?

Query current setting.
Response is +CLIP: <n>,<m>

AT+CLIP=?

Show supported values.
Response is +CLIP:(list of supported
<n>'s).

+CLIR Calling Line Identification Restriction

Enables/disables own number sending to network or returns CLIR subscription status
from network. If product does not support network status query, <m> shall always
equal 2. (GSM 07.07 section 7.7.)

Syntax:

AT+CLIR=<n>

The default option is 0.

AT+CLIR?

Query current setting.
Response is +CLIR: <n>,<m>

AT+CLIR=?

Show supported values.
Response is +CLIR: (list of supported
<n>'s).

+CMEE Report Mobile Equipment Error

This command controls the presentation of extended error information result code.
See also result code +CME ERROR. (07.07 section 9.1.)

Syntax:

AT+CMEE=<n>

Default option is 0.

AT+CMEE?

+CMEE: <n>

AT+CMEE=?

Response is +CMEE: (list of supported
<n>'s).

Parameters:

<n>:
0

disable +CME ERROR: <err> result code
and use ERROR instead

enable +CME ERROR: <err> result code
and use numeric <err> values

enable +CME ERROR: <err> result code
and use verbose <err> values