Nokia 8850 Manual Suplementar
AT Command Set for Nokia 8850
32
Copyright © 2000. Nokia Mobile Phones. All rights reserved.
+CPBW Write Phone Book Entry
<index> must always be given in NMP products. <nlength> and <tlength>
parameters of test command may be figured out from ME model or (in case of SIM)
left empty. (07.07 section 8.14.)
parameters of test command may be figured out from ME model or (in case of SIM)
left empty. (07.07 section 8.14.)
Syntax:
AT+CPBW=<index>,
<number>, <type>, <text>
<number>, <type>, <text>
The default option is [,,129/145].
AT+CPBW=?
Show supported values.
Response is +CPBW: (<index>-
list),[<nlength>], (129,145),[<tlength>]
Response is +CPBW: (<index>-
list),[<nlength>], (129,145),[<tlength>]
Parameters:
<index>: integer type values in the range of location numbers of phonebook memory
<number>: string type phone number of format <type>
<type>: type of address octet in integer format (GSM 04.08, subclause 10.5.4.7) ;
default 145 when dialling string includes international access code character "+",
otherwise 129
default 145 when dialling string includes international access code character "+",
otherwise 129
<text>: string type field of maximum length <tlength>; character set as specified by
command Select TE Character Set +CSCS
command Select TE Character Set +CSCS
<nlength>: integer type value indicating the maximum length of field <number>
<tlength>: integer type value indicating the maximum length of field <text>
+CPIN Enter PIN
Used to enter device passwords that ME is querying, or to query whether ME is
currently querying a password. When last executed AT command failed in
PIN2/PUK2 authentication error (or security code error in case of memory updating),
read command shall return PIN2/PUK2 (or security code) <code> although the
operation of ME is not blocked. (GSM 07.07 section 8.3.)
currently querying a password. When last executed AT command failed in
PIN2/PUK2 authentication error (or security code error in case of memory updating),
read command shall return PIN2/PUK2 (or security code) <code> although the
operation of ME is not blocked. (GSM 07.07 section 8.3.)
Syntax:
AT+CPIN=<pin>,<newpin>
AT+CPIN?
AT+CPIN?
Query current setting.
Response is +CPIN: <code>
Response is +CPIN: <code>
AT+CPIN=?
Shows whether command has been
implemented.
implemented.
Parameters:
<pin>, <newpin>: string type values
+CPMS Preferred Message Storage
This command selects memory storages to be used for reading/deleting <mem1>,
writing/sending <mem2>, and receiving <mem3> short messages. Amount of used
and available message locations in each memory is returned as response. (GSM
07.05 section 3.2.2.)
writing/sending <mem2>, and receiving <mem3> short messages. Amount of used
and available message locations in each memory is returned as response. (GSM
07.05 section 3.2.2.)