Nokia 8850 Manual Suplementar
AT Command Set for Nokia 8850
49
Copyright © 2000. Nokia Mobile Phones. All rights reserved.
L Monitor Speaker Loudness
This setting is ignored. It is included for compatibility reasons. (V.25ter section
6.3.13.)
6.3.13.)
Syntax:
ATL[<n>]
L[0]...L3
M Monitor Speaker Mode
This setting is ignored. It is included for compatibility reasons. (V.25ter section
6.3.14.)
6.3.14.)
Syntax:
ATM[<n>]
M[0]...M2
O Return to On-Line Data State
This command is used when you have made a connection with the remote device
and have escaped (with the +++ command) to the command mode. Give the
command to return from the (on-line) command mode to normal on-line operation.
(V.25ter section 6.1.2.)
and have escaped (with the +++ command) to the command mode. Give the
command to return from the (on-line) command mode to normal on-line operation.
(V.25ter section 6.1.2.)
Syntax:
ATO[<n>]
Go to on-line state. Response is
CONNECT [<speed>].
CONNECT [<speed>].
P Select Pulse Dialling
This setting is ignored. It is included for compatibility reasons. (V.25ter section 6.3.3.)
Syntax:
ATP
Q Result Code Suppression
This command determines whether responses are sent to the DTE or not. Affects
only result codes, not information responses. (V.25ter section 6.2.5.)
only result codes, not information responses. (V.25ter section 6.2.5.)
Syntax:
ATQ[0]
Enable sending of responses to DTE. This
is the default option.
is the default option.
ATQ1
Disable sending of responses to DTE
S0 Automatic Answer
Value indicates number of rings (RING or +CRING result codes) to wait before
answering automatically. Value 0 disables auto-answer. (V.25ter section 6.3.8.)
answering automatically. Value 0 disables auto-answer. (V.25ter section 6.3.8.)
Syntax:
ATS0=<n>
Values for <n> are 0..255 (default 0).
ATS0?
Query current setting.
Response is <n>.
Response is <n>.
S1 Ring Count
Returns number of rings (RING or +CRING result codes) counted after last MT call
setup. (De facto.)
setup. (De facto.)
Syntax:
ATS1?
Query current setting.
Response is <n>. Values for <n> are
000..255.
Response is <n>. Values for <n> are
000..255.
S2 Escape Code Character
The default character is a plus sign. See also the command +++ Escape at page 10.
(De facto.)
(De facto.)