ASKProxima c130 Manual Do Utilizador

If necessary, adjust the height of the projector by pressing the release button 
to extend the foot. 

If necessary, rotate the leveling foot located at the rear of the projector.

Avoid placing your hands near the hot exhaust vent in front of the projector.

Position the projector the desired distance from the screen at a 90 degree 
angle to the screen. 

See page 44 for a table listing screen sizes and distances.

Adjust the zoom or focus.

If the image is not square, first make sure that the projector is perpendicular 
to the screen. If the image is larger or smaller on the top or bottom edge of 
the screen, press the top Keystone button to reduce the upper part of the 
image, and press the bottom Keystone button to reduce the lower part.

If the left or right side of the screen is larger or smaller the other, you can 
turn the projector to the left or to the right a few degrees to square the 
image.

Adjust the Contrast or Brightness in the Picture menu. 

adjust height

elevator
foot

rotate
leveling
foot

release button

adjust distance

adjust zoom or focus

focus
(thin ring)

(thick ring)

zoom

adjust keystone

adjust Picture menu