Denon AVR-2106 Guia De Utilização
ENGLISH
39
Advanced Operation
Advanced Operation
ENGLISH
Remote control unit operations during
multi-source playback (selecting the source)
multi-source playback (selecting the source)
1
Set the
MODE 1
switch to the “AUDIO”.
2
Set the
MODE 2
switch to the “ZONE2”.
3
Press the
ZONE2 ON
button.
To cancel the ZONE2 mode:
Press the ZONE2 OFF button.
Press the ZONE2 OFF button.
4
Press the
FUNCTION
button.
The ZONE2 source switches directly.
5
The output level of the ZONE2 SPEAKER OUT
terminals can be controlled pressing the
terminals can be controlled pressing the
VOLUME
button on the remote control unit.
Default setting (ZONE2 VOLUME LEVEL):
– – – dB (MINIMUM)
– – – dB (MINIMUM)
6
When the ZONE2 SOURCE function is set to
TUNER, the preset channel can be selected
using the
TUNER, the preset channel can be selected
using the
CHANNEL
button on the remote
control unit.
This is only possible when the main unit in the ZONE2 mode
(
(
page 47).
Outputting a program source to amplifier,
etc., in a different room (ZONE2 mode)
etc., in a different room (ZONE2 mode)
1
Press the
ZONE2/REC SELECT
button to display
the “ZONE2 SOURCE” on the display.
The display switches as follows each time the button is
pressed.
pressed.
2
Turn the
FUNCTION
knob to select the source
you want to output appears on the display.
3
Start playing the source to be output.
For operating instructions, refer to the manuals of the
respective components.
To cancel, turn the FUNCTION knob and select “SOURCE”.
respective components.
To cancel, turn the FUNCTION knob and select “SOURCE”.
REC
ZONE2
4
Press the
ZONE2
button.
Lights
• The signals of the source selected in the ZONE2 mode are also
output from the VCR-1, VCR-2 and CDR/TAPE recording output
terminals.
terminals.
• Digital signals are not output to the ZONE2 output terminals.
FUNCTION ZONE2/REC SELECT
POWER
SPEAKER
ZONE2
MODE 2
CHANNEL
FUNCTION
MODE 1
VOLUME
ZONE2 ON
ZONE2 OFF