Rocketfish RF-RBWS02 Guia Do Utilizador
21
RF-RBWS02
Using your outdoor speaker kit
Note: The HUB STATUS switch is shipped from the factory in the On position for use
with the outdoor speaker. If you already have Rocketboost components in your
house and another node is configured to be the hub, put the hub switch in the
Disable mode and join both the sender/receiver and the outdoor speaker to the hub
that you already own. Otherwise you will not need to join the network, as the
sender/receiver and outdoor speaker are joined at the factory and your system is
ready to use.
house and another node is configured to be the hub, put the hub switch in the
Disable mode and join both the sender/receiver and the outdoor speaker to the hub
that you already own. Otherwise you will not need to join the network, as the
sender/receiver and outdoor speaker are joined at the factory and your system is
ready to use.
To enable the hub:
• Slide the HUB STATUS switch on the sender to ENABLE.
To turn the sender/receiver on and off:
1
When connecting to an AC outlet, the device automatically powers up.
To power off the device, press the button.
2
Press the button on the sender/receiver again to turn it off. The power
LED turns off and the standby LED turns red.
Remove the AC adapter from the wall outlet to power off the
sender/receiver completely.
Remove the AC adapter from the wall outlet to power off the
sender/receiver completely.
Note: If you have a Rocketboost network (other senders and receivers on the
network), the hub unit will need to remain powered at all times. The unit can be in
standby, but it must have the AC adaptor connected.
Note: The sender/receiver has its own memory. After the sender/receiver and your
standby, but it must have the AC adaptor connected.
Note: The sender/receiver has its own memory. After the sender/receiver and your
devices are joined once, they will remember each other and join automatically when
the sender/receiver and your devices are powered on again.
the sender/receiver and your devices are powered on again.
Establishing communication
Note: Interference is possible from other devices that operate in the same frequency
band. You may have to move the sender and wireless speaker around a bit to find an
interference-free location. Make sure your Rocketboost products are at least 18" from
any wireless router.
Note: If this is your first Rocketboost product you will not need to join the devices -
interference-free location. Make sure your Rocketboost products are at least 18" from
any wireless router.
Note: If this is your first Rocketboost product you will not need to join the devices -
they were already joined at the factory. You can power them up and they should
connect with each other.
connect with each other.
Tip
: For detailed connection information to other Rocketboost products, see the
corresponding user manual for your other Rocketboost products.
RF-RBWS02_09-0535_MAN_ENG_V1.fm Page 21 Thursday, August 27, 2009 7:39 PM