Integra dpc-7.4 Manual Do Utilizador

 

12

 

For detailed information, refer to the pages in parenthesis.

 

A

 

These RCA/phono connectors can be used to connect a 
TV or projector with RCA/phono component video 
inputs.
The DPC-7.4 has two component video outputs, the 
COMPONENT 1 and COMPONENT 2, however, they 
output the same video signal.

 

B

 

These BNC connectors can be used to connect a TV or 
projector with BNC component video inputs.
The DPC-7.4 has two component video outputs, the 
COMPONENT 1 and COMPONENT 2, however, they 
output the same video signal.

 

C

 

These connectors can be used to connect TVs or projec-
tors with S-Video inputs.
The DPC-7.4 has two S-Video output connectors. They 
output the same video signal.

 

D

 

These RCA/phono connectors can be used to connect 
TVs or projectors with composite video inputs.
The DPC-7.4 has two composite video output connec-
tors. They output the same video signal respectively.

 

E

 

These RCA/phono connectors can be connected to the 
analog audio inputs on your TV, hi-fi amp, AV receiver, 
or surround sound decoder (Dolby Pro Logic). There are 
two sets of outputs. You could connect one set to your AV 
receiver, the other to your TV for those occasions when 
you want to watch a DVD-Video but don’t want to use 
your AV receiver.
The DPC-7.4 has two pairs of stereo analog audio output 
connectors. They output the same audio signal respec-
tively.

 

F

 

The IR IN connector can be used to connect a commer-
cially available IR receiver, which can be used to pickup 
signals from the remote controller when the DPC-7.4 is 
located in another room, installed in a rack, or is out of 
range of the remote controller
The IR OUT connector can be used to connect a com-
mercially available IR emitter, which can be used to pass 
remote controller signals received by the IR IN along to 
other AV components.

 

G

 

These 

 (Remote Interactive) connectors can be con-

nected to the 

 connectors on your other Integra/

Onkyo AV components for interactive control.
To use 

 you must also make an analog RCA/phono 

connection between your DPC-7.4 and Integra/Onkyo 
AV receiver, even if they are connected digitally.

 

H

 

This optical digital audio output can be connected to an 
optical digital audio input on a hi-fi amp, AV receiver, or 
surround sound decoder (Dolby Digital, DTS).

 

I

 

This coaxial digital audio output can be connected to an 
coaxial digital audio input on a hi-fi amp, AV receiver, or 
surround sound decoder (Dolby Digital, DTS).

 

J

 

This RS-232 port can be connected to an external con-
troller.

 

K

 

The supplied power cord is connected here. The other 
end of the power cord should be connected to a suitable 
wall outlet.

2

3

1

4

5

6

7

K

J

9

8