Vinotemp 1500cd Guia Do Utilizador

                                                                                

- 6 -

•  Cut a rectangular opening with the ¼” clearance at the rear of wine 

cabinet to the width and height of the cooling unit. 

•  If top exhaust, cut a rectangular opening at the top of the cabinet to the 

length and width of the top exhaust openings. 

•  Mount the gaskets on the four mounting sides. 

•  If top exhaust, place the gaskets along the top openings at the top of the 

cooling unit. 

•  Place the cooling unit to a flat and stable place.  

•  Then move it on the top of the rack temporally.  

•  Move the cooling unit towards the mounting sides and push to compress 

the gasket.  

•  Locate the 3 brackets (6) and use 7/16” wrench to tighten the 3 screws (7). 

•  Screw the exhaust and fresh air grille on the opening from the rear side of 

the cabinet. 

•  If top exhaust, install the top exhaust grille at the top of the cabinet.  

•  Plug the cooling unit in receptacle. 

•  Screw the 2 screws (4) and locate the light on the ceiling. 

•  Plug the light in receptacle. 

•  Plug the wine cabinet. 

 
3. Electrical Cord 
 

•  We strongly recommend against the use of an extension cord. However, if 

you still select to use an extension cord, it is absolutely necessary that it is 
a UL LISTED 3-wire grounding type appliance extension cord. The 
marked rating of the extension cord should be 115 V, 15 A. or equivalent 
and not greater than 15ft in length.