Fujifilm f10 Manual Do Proprietário

22

23

●

The image shown on the LCD monitor before the picture is
taken may differ in brightness, color, etc. from the image
actually recorded. Play back the recorded image to check it
(

➡P.26).

Use the LCD monitor to frame the shot so that the
subject fills the entire AF (Autofocus) frame.

Press the shutter button down halfway. When a
short double-beep is heard, the camera focuses on
your subject. The AF frame on the LCD monitor
becomes smaller and the camera sets the shutter
speed and aperture. The indicator lamp (green)
changes from blinking to lit.

●

When a short double-beep is not heard and “

{

” appears on

the LCD monitor, the camera cannot focus.

●

Pressing the shutter button down halfway freezes the image
on the LCD monitor briefly. This image is not the recorded
image.

●

When “

{

” appears on the LCD monitor (e.g. the shot is too

dark for the camera to focus), try standing about 2 m (6.6 ft.)
from the subject to take the picture.

Before the flash fires, “

∑

” appears on the LCD monitor. When selecting a slow shutter speed will

cause camera shake, “

|

” appears on the LCD monitor. Use the flash to take pictures. According

to the scene or mode being shot, use a tripod.

NNN 1111 0000

1   2 5 0  

  2 5 0   F 5

F 5   6

  6

1   2 5 0   F 5   6

1   2 5 0   F 5   6

1   2 5 0   F 5  6

Press the shutter button down fully. When a
clicking sound is heard, the camera records the
image.

●

There is a slight delay between the shutter button being
pressed and the picture being taken. Play back the shot to
check the image.

●

When pressing the shutter button down fully in one motion,
the camera takes the picture without the AF frame changing.

●

When the camera takes the picture, the indicator lamp lights
orange (shooting disabled).

●

When taking a picture using the flash, the image may
disappear and go dark briefly due to flash charging. The
indicator lamp blinks orange during charging.

●

See P.110-111 for information on the warning displays.

◆

◆

The FinePix F10 uses a high-precision autofocusing mechanism. However, it may have difficulty
focusing on the following:
h Very shiny subjects such as a mirror or car

body

h Subjects photographed through glass
h Subjects that do not reflect well, such as hair

or fur

h Subjects with no substance, such as smoke or

flames

h Dark subjects
h Fast moving subjects
h Subjects with little or no contrast between the

subject and the background (such as white

walls or subjects dressed in the same color as
the background)

h Shots where another high-contrast object (not

the subject) is close to the AF frame and is
either closer or further away than your subject
(such as a shot of someone against a
background with strongly contrasting
elements)

For such subjects use AF/AE lock (

➡P.24).

Lit green

Locking the focus

Blinking green

AF/AE in progress, camera shake warning or AF warning (ready to shoot)

Blinking green and
orange alternately

Recording to xD-Picture Card (ready to shoot)

Lit orange

Recording to xD-Picture Card (not ready)

Blinking orange

Charging the flash (flash will not fire)

Blinking red

i xD-Picture Card Warnings

No card inserted, card not formatted, incorrect format, card full and xD-Picture Card error

i Lens operation error

✽ Detailed warning messages appear on the LCD monitor (➡P.110-111).

Press the shutter button down halfway in dimly lit
conditions. The camera fires the AF-assist
illuminator (green) to allow easier focusing.
Note that the effective range decreases for
telephoto shots.

●

Even when the AF-assist illuminator fires, the camera may
have difficulty focusing in some conditions.

●

Even though there is no danger to safety, do not expose it
directly in someone’s eyes from a short distance.

●

The camera focuses most easily when a picture is taken at a
distance of around 4 m (13.1 ft.) with wide-angle and 2.3 m
(7.5 ft.) with telephoto.

●

See P.81 for information on turning the AF-assist illuminator
off.

The number of available frames appears on the
LCD monitor.

●

See P.41 for information on changing the quality setting.

●

The default quality “

˘

” set at shipment is “

5

N”.

NNN 1111 0000

■ Standard number of frames per xD-Picture Card

The table below shows the standard number of frames for a new xD-Picture Card formatted on the camera. The larger the
xD-Picture Card capacity, the bigger the difference between the actual number of frames and the number shown here. Also,
the size of an image file varies depending on the subject. So the number of remaining shots may decrease by 2 or may
remain the same. For this reason, the number displayed may not show the actual number of frames.

5

F

2848 

× 2136

5

10

21

42

85

170

5

N

10

20

42

84

169

339

„

3024 

× 2016

10

20

42

84

169

339

Quality setting

Number of recorded pixels

DPC-16 (16 MB)

2

1600 

× 1200

25

50

101

204

3

2048 

× 1536

19

40

81

162

325

651

409

818

`

640 

× 480

122

247

497

997

1997

3993

DPC-32 (32 MB)

DPC-64 (64 MB)

DPC-128 (128 MB)

DPC-256 (256 MB)

DPC-512/M512 (512 MB)

341

680

680

1305

1639

7995

DPC-M1GB (1 GB)

TAKING PICTURES (B AUTO MODE)