Fujifilm f10 Manual Do Proprietário

12

13

1 Check that the camera is turned off.
2 Plug the terminal adapter into the terminal

adapter connection socket on the camera.

12

Plug the AC power adapter connector into “DC IN
5V” socket of the terminal adapter.

Plug the AC power adapter into the power outlet.

The self-timer lamp lights red and battery charging
begins. When charging is completed, the self-timer
lamp turns off.

h Full recharging times for completely depleted

battery
At an ambient temperature of +21°C to +25°C 
(+70°F to +77°F)
NP-120: approx. 4 hours

●

Charging times increase at low temperatures.

●

If the self-timer lamp blinks during charging, a charging error
has occurred and the battery cannot be charged. If this
occurs, see P.112.

●

Turning the camera on during charging interrupts the
charging.

●

Use the BC-65 Battery Charger (sold separately) to charge
battery more quickly (

➡P.106).

Use the AC power adapter to avoid losing
power at inconvenient times, such as when
downloading photographed images to your PC.
You can take pictures and play back images
without worrying about depleting the battery.

h Compatible AC power adapters

AC-5VW (included)
AC-5VX (sold separately)
AC-5VH (sold separately)
AC-5VHS (sold separately)

●

Always use the FUJIFILM products listed on the left.

●

See P.108 for notes on using the AC power adapter.

●

Only connect and disconnect the AC power adapter
when the camera is off.
Connecting or disconnecting the AC power adapter
while the camera is on temporarily interrupts the power
supply to the camera, so that images or movies being
shot are not recorded. Failing to turn the camera off first
can also result in damage to the xD-Picture Card or
malfunctions during PC connection.

●

The socket-outlet shall be installed near the equipment
and shall be easily accessible.

●

The shape of the plug and socket-outlet depends on the
country of use.

◆

◆

When you try to charge the battery immediately after the camera has been used continuously for a long
period (e.g. shooting a movie or connected to a PC), charging may not begin soon (the self-timer lamp
does not turn red).
This is not a camera fault, but is for protecting the battery from being charged while it is warm. Battery
may degrade when charged at high temperatures.
Leave the camera connected to the AC power adapter, and charging will automatically begin within 30
minutes.