Fujifilm S2-Pro Manual Do Proprietário

26

27

x

Mount an external flash here.

x

Hold down this button to move the release mode 
switch.

x

Allows you to select the 
exposure mode, the custom 
settings and the ISO setting,
    : Programmed Auto
    : Shutter-priority Auto
  : Aperture-priority Auto
  : Manual
    : Custom settings
    : ISO setting (sensitivity)

x

Selects Single-frame, Continuous, Self Timer or Multi Exposure as the shutter release mode.

x

Hold down this button as you 
remove the lens.

x

Switches the camera on and off.

x

Selects AF-S (Single-AF servo), AF-C 
(Continuous-AF servo) or M (Manual) 
as the focus mode.

x

To use the built-in flash, press 
this button to pop up the flash.

x

Use this to connect flash units 
that require a synchro cord.

x

This button allows you to check the depth of field.

x

Press this button down halfway to restore 
the camera to Photography mode. Press 
down fully to take a picture.

x

Changes the aperture and other settings.

x

Illuminates the top display panel.

x

Makes the image in the viewfinder 
easier to see. Set this knob to the 
position where the focusing area 
appears sharpest.

x

Used with the main command dial to 
select the exposure compensation value.

x

Used with the main command dial to select 
the flash exposure compensation value.

x

Displays the information shown 
in the viewfinder along with 
other information.

x

Changes settings such as the shutter 
speed.

x

Used with the camera dials to select Auto Exposure 
Bracketing.
Main command dial: Switches Auto Exposure Bracketing ON 
and OFF.
Sub-command dial: Selects a combination of exposure offset 
and number of shots.

x

Used with the main command dial 
to select Synchro mode.

x

Remove this before performing diopter 
adjustment.

x

Selects Multi, Center-weighted or Spot 
as the metering system.

x

Locks the exposure and focus while 
pressed.