Fujifilm S2-Pro Manual Do Proprietário

Settings

■ Custom Settings List

Setting

No.

Display

Details

0: METERED VALUE

➡

UNDER

➡ OVER (default)

1: UNDER

➡ METERED

VALUE

➡ OVER

BRACKETING ORDER

Allows you to change the compensation sequence
when auto exposure bracketing is used.

0: OFF (default)
1: ON

ON-DEMAND GRID LINES
DISPLAY

If you display the framing guides, you can use the
intersections of the horizontal and vertical lines to
position your main subject in the shot or align one of the
horizontal lines with the horizon. This allows you to
compose the desired shot while monitoring the subject's
size and the balance.

0: AUTO (default)
1: OFF
2: ON

ILLUMINATION FOR
FOCUS AREA

Specifies the illumination used for the focus area in the
viewfinder.

0: NORMAL (default)
1: ENABLES

ROTATION

FOCUS AREA SELECTION

Selecting cyclic focus area selection allows you to
select the opposite focus area without changing which
part of the 4-direction button you have to press.

0: DISABLED (default)
1: ACTIVATED

AE-LOCK

This setting lets you apply AE lock by pressing the
shutter button down halfway.

0: DISABLED (default)
1: ACTIVATED

LONG EXP. (BULB) AT
MANUAL MODE

Select “1” to take bulb flash shots in the “M” exposure
mode.

0: ENABLED (default)
1: DISABLED

CLOSEST-SUBJECT-
PRIORITY DYNAMIC AF
AT S-AF MODE

If you select “1”, Closest-subject Priority Dynamic AF is
not used in AF-S mode.

0: DISABLED (default)
1: ENABLED

CLOSEST-SUBJECT-
PRIORITY DYNAMIC AF
AT C-AF MODE

If you select “1”, Closest-subject Priority Dynamic AF is
used in AF-C mode.

0: AE/AF LOCK

(default)

1: AE LOCK ONLY
2: AF LOCK ONLY
3: AE REMAINS

LOCKED

4: AF OPERATION

AE/AF LOCK BUTTON

Normally, AE lock (exposure recording) and AF lock
(focus lock) are both applied concurrently when you
press the “AE-L/AF-L” button. However, this can be
changed so that only AE lock or only AF lock is applied,
or so that that the AE lock status is maintained. If the
AE/AF lock is used with the “Maintain AE lock” setting,
pressing the “AE-L/AF-L” button again or releasing the
shutter cancels the lock.
In addition, though the auto focus (AF) normally
operates when the shutter button is pressed down
halfway, you can change this so that AF operates when
the “AE-L/AF-L” button is pressed. (In this case, AF
does not operate when the shutter button is pressed
down halfway.)

0: DISABLED (default)
1: ENABLED

COMMAND DIAL
FUNCTIONS

Use this setting to change the main command dial and
sub-command dial operation during photography.
0: Main: Changes the shutter speed.

Sub: Changes the aperture.

1: Main: Changes the aperture.

Sub: Changes the shutter speed.

0: SINGLE SHUTTER

RELEASE (default)

1: CONTINUOUS

SHUTTER
RELEASE

MULTIPLE EXPOSURE

Changing this setting allows you to use continuous
shooting for multi-exposure shots.

CUSTOM SETTING (CSM)

The custom settings allow to modify camera functions such as how information is displayed in
the viewfinder and which functions are assigned to which buttons.

Set the exposure mode dial to “CSM”.

1Turn the main-command dial to select an

option.

2Turn the sub-command dial to change the

setting.

3“R” appears on the top display panel.

When you have finished the settings, set the exposure mode dial to a setting other than
“CSM”.

●

The custom settings are retained when the camera is switched off.

Cancelling custom settings

1Set the exposure mode dial to “CSM”.
2Hold down the “q” and “u” buttons together

for at least 2 seconds (green markings are
positioned alongside).

The top display panel flashes briefly and the
settings are reset.

h All the custom settings are reset to their

default values.

h The ISO sensitivity is reset to 200.

ＣＵＳＴＯＭＳＥＴＴＩＮＧ

ＭＥＮＵ

ＳＥＴＩＮＧ

２．

２．ＯＮ−ＤＥＭＡＮＤＧＲＩＤＬＩＮＥＳＤＩＳＰＬ

ＯＮ−ＤＥＭＡＮＤＧＲＩＤＬＩＮＥＳＤＩＳＰＬＡＹ

ＡＹ

０

ＯＦＦ

１

ＯＮ

ＭＡＩＮ

ＳＵＢ