Novation remote25sl Guia Do Utilizador

• 

39

•

Using The Footswitch & Pedal In A Template

Normally, MIDI Continuous Controller Numbers (CCs) 11 and 64 are used for the Expression Pedal and
Sustain On/Off Pedal. These CC numbers are defined in all Factory Preset Templates, but of course may
be edited within a Template to transmit any other type of Controller data instead.

In Play Mode, the following display will appear if a footswitch is activated :

Sustain Pedal
127 CC64   1 U12

The value to the bottom left of the display will indicate if the switch is On or Off (On = 127, Off = 0). The
name of the pedal may be edited in Template edit mode if required.

The Footswitch normally transmits using CC64.

In PLAY mode the following display will appear if the Expression pedal is moved..

Expression Pedal
32  CC11   1 U12

The value to the bottom left of the display (32 is this example) will indicate show the current position of the
pedal. The name of the pedal may be edited in Template edit mode if required.

The Expression Pedal normally transmits using CC11.

The socket on the rear panel excepts a ‘Tip Ring Sleeve’ type of  1/4” Jack.  The ReMOTE 25 sends
power to the Tip and Sleeve and the potentiometer in the pedal returns a voltage ( 0 - 5 Volts ) on the Ring
connection.