Nortel 4065r Manual Do Utilizador
Accessories
84
To remove the battery pack:
1.
Ensure that the handset is switched off.
2.
Place the handset with the display down on a flat surface
3.
Figure 7: Removing the battery pack
Removing the MEM card
Use the following procedure to remove the MEM card from the handset.
Note: This procedure is required only if you plan to use the MEM card
with the optional MEM card tool.
with the optional MEM card tool.
To remove the MEM card:
1.
Press the small tag b locks to release the MEM card.
2.
Slide the MEM card out from under the two small crescents, as
shown in Figure 8 (1), and lift it out, as shown in Figure 8 (2).
shown in Figure 8 (1), and lift it out, as shown in Figure 8 (2).
Figure 8: Removing the MEM card
Installing the MEM card
Use the following procedure to install the MEM card into the handset.
1
2
2
1
a
b