Peavey sp 3g Manual Do Utilizador
SPECS
P E A V E Y E L E C T R O N I C S
SP
™
3G
Sound Reinforcement
Enclosure with
Sound Guard
Enclosure with
Sound Guard
™
HF
Protection System
SPECIFICATIONS
Frequency Response, 1 Meter
On-Axis, Swept-Sine in Anechoic
Environment:
On-Axis, Swept-Sine in Anechoic
Environment:
54 Hz to 17 kHz
Low-Frequency Cut-Off (-3 dB point):
54 Hz
Usable Low-Frequency Limit
(-10 dB point):
(-10 dB point):
47 Hz
Power Handling:
Full-Range:
350 W continuous (52.9V RMS)
700 W program
1,400 W peak
350 W continuous (52.9V RMS)
700 W program
1,400 W peak
Bi-amp Low:
350 W continuous (52.9 V RMS)
700 W program
1,400 W peak
350 W continuous (52.9 V RMS)
700 W program
1,400 W peak
Bi-amp High:
150 W continuous (34.6 V RMS)
300 W program
600 W peak
150 W continuous (34.6 V RMS)
300 W program
600 W peak
Sound Pressure Level, 1 Watt, 1
Meter in Anechoic Environment:
Meter in Anechoic Environment:
Full-Range:
99 dB (2.8 V)
Bi-amp Low:
100 dB (2.8 V)
Bi-amp High:
99 dB (2.8 V)
Maximum Sound Pressure Level
(1 meter):
(1 meter):
Full-Range:
125 dB continuous
131 dB peak
125 dB continuous
131 dB peak
Bi-amp Low:
126 dB continuous
132 dB peak
126 dB continuous
132 dB peak
Bi-amp High:
120 dB continuous
127 dB peak
120 dB continuous
127 dB peak
Radiation Angle Measured at -6 dB
Point of Polar Response:
Point of Polar Response:
500 Hz to 1.6 kHz:
Horizontal: 122
Horizontal: 122
°
±
-15
°
Vertical: 152
°
±
-38
°
1.6 kHz to 5 kHz:
Horizontal: 79
Horizontal: 79
°
±
21
°
Vertical: 83
°
±
22
°
5 kHz to 16 kHz:
Horizontal: 87
Horizontal: 87
°
±
10
°
Vertical: 45
°
±
4
°
Directivity Factor, Q (Mean):
8
±
4.3
Directivity Index, Di (Mean):
8.3 dB
±
2.8 dB
Transducer Complement:
1505-8 KADT Black Widow
®
woofer
6.5" Pro mid-range driver
22XT compression driver
22XT compression driver
Box Tuning Frequency:
58 Hz
Crossover Frequency (internal
passive):
passive):
800 Hz
Minimum Recommended Active
Crossover Frequency and Slope for
Bi-amping:
Crossover Frequency and Slope for
Bi-amping:
800 Hz at 18 dB/octave
Time Offset:
0.14 mS (delay Lows)
Impedance (Z):
Full-Range Nominal:
8
Ω
Full-Range Minimum:
5.3
Ω
Lows Nominal:
8
Ω
Highs Nominal:
8
Ω
Input Connections:
Two paralleled 1/4" phone jacks for
full-range
One 1/4" phone jack for bi-amp low
One 1/4" phone jack for high and mid bi-
One 1/4" phone jack for high and mid bi-
amp
Enclosure Materials & Finish:
3/4" plywood enclosure covered with black
carpet and protective polymer corners
Expanded metal grille to protect the mid
and low drivers
Mounting Provisions:
One SA-1 stand mount on bottom of
enclosure.
Dimensions (H x W x D):
33.50" x 21.50" x 22.50"
(85.1 cm x 54.6 cm x 57.1 cm)
Rear width 14.25" (36.1 cm)
(85.1 cm x 54.6 cm x 57.1 cm)
Rear width 14.25" (36.1 cm)
®