SimpleTech fv-u35 Guia Do Programa

 

!

 

The Restore window also lets you delete backed up files on the source media drive. 
Perform steps 1 through 7 as described. Then, in step 8, click the Delete button. 
When a message asks if you are sure you want to delete the selected file(s) from the 
source media drive, click Yes to delete them or No to retain them. 

 

The following sections provide detailed information about the steps used to restore data. 

To restore files, you must have at least one target media drive and at least one source drive. 

  The target media drive is the drive that holds the backed-up files. 

  The source drive is the repository that will hold the restored files. 

The Drives button on the left side of the StorageSync window lets you specify these drives. 
When you click this button, the Drive Manager screen appears (see Figure 17). This screen 
shows the source and target drives that are available, as well as their drive information. If you 
have more than one drive, click the drive to view its information in the Drive Information 
areas at the bottom of the screen. 

The Drives button on the left side of the StorageSync window lets you specify these drives. 
When you click this button, the Drive Manager screen appears (see Figure 23). This screen 
shows the source and target drives that are available, as well as their drive information. If you 
have more than one drive, click the drive to view its information in the Drive Information 
areas at the bottom of the screen.