SimpleTech fv-u35 Manual Do Utilizador

Página de 120
2
Installing SimpleShare
I
NSTALLING
 S
IMPLE
S
HARE
 S
ERVER
1
Connect the provided Ethernet cable to the Network 
connector on SimpleShare’s rear panel. Connect the 
other end of the cable to your switch, router or directly to 
your computer.
2
Connect the low voltage connector on the AC power 
adapter to SimpleShare’s DC-IN jack. Connect the 
power plug on the other end of the adapter to a live 
120/240V electrical outlet, surge protector or UPS 
(uninterruptable power supply).
3
Momentarily press the Power push button to power on 
SimpleShare.
Only use the AC power adapter that came with SimpleShare. 
Using any power adapter, other than the one provided by 
SimpleTech, may damage SimpleShare and voids your 
warranty. SimpleTech assumes no liability for damage 
resulting from improper use.
The only way to shut off power completely to SimpleShare is 
to disconnect the power plugs from the power source. Make 
sure the power cords for SimpleShare are within easy reach 
so that you can unplug SimpleShare when you need to do so.