Lexmark W810 Guia Do Utilizador
109
Re
pl
pl
aci
n
n
g su
ppl
ies
Requesting audible alarms
You can choose to have the printer sound an audible alarm when it deter-
mines a consumable needs to be replaced. The printer then stops pro-
cessing jobs and waits until someone presses
mines a consumable needs to be replaced. The printer then stops pro-
cessing jobs and waits until someone presses
Go
from the operator panel
before it continues printing. Setting Toner Alarm or Staple Alarm to Single
or Continuous ensures that someone in the printer workgroup is aware
that a consumable needs to be replaced, but it can also delay the printing
of jobs in a network environment.
or Continuous ensures that someone in the printer workgroup is aware
that a consumable needs to be replaced, but it can also delay the printing
of jobs in a network environment.
Refer to the
Complete Printer Reference
on Lexmark’s Web site
(www.lexmark.com) for more information about changing the alarm set-
tings from the Setup Menu.
tings from the Setup Menu.
NOTE: If
Replace Toner To Continue
or
Replace PC Kit To Continue
appears on the display, you cannot clear the display by
pressing
pressing
Go
. To protect your printer from damage, the
printer ceases operation until the item listed in the
message is replaced.
message is replaced.
Storing supplies
Choose a cool, clean storage area for your printer supplies. Store sup-
plies
plies
right side up
in their original packaging until you are ready to install
them.
Do not expose printer supplies to:
•
Direct sunlight
•
Temperatures above 35°C (95°F)
•
High humidity (above 80%)
•
Salty air
•
Corrosive gases
•
Heavy dust