Lexmark W810 Guia Do Utilizador

The fuser uses heat and pressure to make toner adhere to paper. Install a 
new fuser when 

 appears on the printer operator panel dis-

play, or you may experience print quality or paper feeding problems. 

NOTE: You’ll need a Phillips screwdriver to replace the fuser.

When you call your Lexmark representative to order a new fuser, you may 
be offered the option of paying a reduced price if you agree to return your 
old fuser to Lexmark within 30 days. The representative can give you 
details on this return program.

After you’ve replaced the fuser, follow the instructions beginning on 
page 147 to reset the printer’s internal counter for the fuser. This clears 
the 

 message from the printer operator panel display and 

ensures the printer alerts you when it is again time to replace the fuser.

Before you begin this procedure, make sure the 
printer is not busy processing a print job. Turning the 
printer off deletes all held jobs stored in printer 
memory. Open the Job Menu to review the held jobs 
before continuing.