Lexmark W810 Guia Do Utilizador
![Lexmark](https://files.manualsbrain.com/attachments/878cae5fca737841ce37f41a7ee73881a8b54f60/common/fit/150/50/823435a5b9c868f91a4b7f8b99ddfd9b9c699edf1f6ff104003e82a92d7f/brand_logo.png)
162
Finisher
Priming the stapler
After you clear a staple jam, prime the stapler to ensure the staples are in
the proper position when the next stapled job is requested.
the proper position when the next stapled job is requested.
To prime the stapler:
1
From the
Ready
display, press
Menu>
until
Job Menu
appears
on the second line of the display.
2
Press
Select
.
3
Press
Menu>
or
<Menu
until
Prime Stapler
appears on the
display.
4
Press
Select
.
Priming Stapler
appears on the display. The printer pulls a sheet
of paper from the tray specified in the Staple Prime Source menu,
feeds it into the finisher, and attempts to staple it. (You may hear
the stapler punch several times before the page is successfully
stapled.) The printer then ejects the page into bin 2.
feeds it into the finisher, and attempts to staple it. (You may hear
the stapler punch several times before the page is successfully
stapled.) The printer then ejects the page into bin 2.
If
Priming Failed, Retry. Go/Stop?
appears on the display:
–
Press
Go
to attempt priming the stapler again.
–
Make sure the staple priming source tray specified in the Fin-
ishing Menu has paper in it.
ishing Menu has paper in it.
–
Make sure the stapler is installed correctly, is not jammed,
and has an ample supply of staples.
and has an ample supply of staples.
5
Resend your job to the printer.