Lexmark W810 Guia Do Utilizador
169
Finishe
r
Aligning the finisher with the printer
Frequent paper feeding problems in the finisher may indicate that the fin-
isher is not properly aligned with the printer. Complete the instructions in
the following sections to adjust the alignment of the finisher with the
printer.
isher is not properly aligned with the printer. Complete the instructions in
the following sections to adjust the alignment of the finisher with the
printer.
Adjusting the finisher’s standing position
Look at the finisher and the printer carefully from the front. If the finisher
and printer are parallel, as shown in the following illustration, skip to
“Adjusting the finisher’s height” on page 173.
and printer are parallel, as shown in the following illustration, skip to
“Adjusting the finisher’s height” on page 173.