Lexmark W810 Guia Do Utilizador
212
Re
movi
ng opti
o
ns
Removing an optional drawer
Before you can remove an optional drawer, you must remove the locking
clips that secure it to the printer. You need a Phillips screwdriver for this
procedure.
clips that secure it to the printer. You need a Phillips screwdriver for this
procedure.
NOTE: The illustrations in this section show removing a
2500-sheet drawer. The procedure is the same if you are
removing an optional 500-sheet drawer.
removing an optional 500-sheet drawer.
1
Turn off the printer and unplug the power cord.
2
If you have attached a finisher option or a mailbox option to
your printer, detach the option before continuing.
your printer, detach the option before continuing.
See page 193 for detailed instructions.
3
Pull open trays 3 and 4.
4
Remove the locking clip from the left and right sides of the
trays, as shown.
trays, as shown.
5
Close the trays.