Lexmark C935 Manual Suplementar
3
Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the
edges on a level surface.
edges on a level surface.
4
Load the paper stack with the recommended print side faceup.
5
Make sure the paper guides are secure against the edges of the paper.
6
Insert the tray into the printer.
7
If a different type of paper was loaded than the type previously loaded in the tray, change the Paper Type setting
for the tray from the control panel.
for the tray from the control panel.
Setting the Paper Size and Paper Type
The Paper Size setting is determined by the position of the paper guides in the tray for all trays except the multipurpose
feeder. The Paper Size setting for the multipurpose feeder must be set manually. The factory default Paper Type setting
is Plain Paper. The Paper Type setting must be set manually for all trays that do not contain plain paper.
feeder. The Paper Size setting for the multipurpose feeder must be set manually. The factory default Paper Type setting
is Plain Paper. The Paper Type setting must be set manually for all trays that do not contain plain paper.
1
Make sure the printer is on and Ready appears.
2
From the control panel, press
.
3
Press
repeatedly until
Paper Menu
appears, and then press
.
4
Press
repeatedly until
Paper Size/Type
appears, and then press
.
5
Press
repeatedly until the correct tray appears, and then press
.
6
Press
repeatedly until
appears next to the correct size, and then press
.
7
Press
or
repeatedly until the correct Paper Type setting appears, and then press
.
Submitting Selection
appears.
Printing guide
Page 4 of 4