Lexmark T520 Manual Do Utilizador
10
Step 2: Install memory and
option cards
You can customize your printer memory capacity and con-
nectivity by adding optional cards. The instructions in this
section help you install any of the following options:
nectivity by adding optional cards. The instructions in this
section help you install any of the following options:
•
Printer memory
•
Flash memory
•
Tri-Port Adapter
•
USB/Parallel 1284-C Interface Card
•
Parallel 1284-C Interface Card
•
MarkNet™ internal print servers (also called
internal network adapters or INAs)
internal network adapters or INAs)
•
Hard disk
•
Optional firmware card
Accessing the printer system
board
You must access the printer system board to install printer
memory, flash memory, or an option card.
memory, flash memory, or an option card.
1
Make sure the printer power is off, the printer power
cord is unplugged, and all cables are disconnected
from the back of the printer.
cord is unplugged, and all cables are disconnected
from the back of the printer.
2
Press the release latches to open the upper and
lower front doors.
lower front doors.