Fujifilm X100 Guia Do Utilizador

Automatically vary settings over a series of pictures.

 Press the command dial up (DRIVE) to display drive options and rotate the dial or 

press it up or down to highlight one of the following:

Press the command dial left or right to highlight a bracketing amount.  Each time the 
shutter button is pressed, the camera will take three shots at up to about 5 fps: one us-
ing the metered value for exposure, the second overexposed by the selected amount, 
and the third underexposed by the same amount (regardless of the amount selected, 
exposure will not exceed the limits of the exposure metering system).

Press the command dial left or right to highlight a bracketing amount.  Each time the 
shutter is released, the camera will take a picture at the current sensitivity (

P 51)  and 

process it to create two additional copies, one with sensitivity raised and the other with 
sensitivity lowered by the selected amount (regardless of the amount selected, sensitiv-
ity will not exceed ISO 6400 or fall below ISO 200).

Each time the shutter is released, the camera takes one shot and processes it to create 
three copies with diff erent fi lm simulation settings (

P

 54): 

c

 PROVIA/STANDARD for 

the fi rst, 

d

 Velvia/VIVID for the second, and 

e

 ASTIA/SOFT for the third.

Each time the shutter button is pressed, the camera takes three shots with diff erent 
dynamic ranges (

P

 70): 100% for the fi rst, 200% for the second, and 400% for the third. 

The shots are taken at rates of up to about 5 fps.  While dynamic range bracketing is in 
eff ect, sensitivity will be restricted to a minimum of ISO 800; the sensitivity previously in 
eff ect is restored when bracketing ends.

±1

±

±

Press MENU/OK to select the highlighted option.

 Take photographs.