Fujifilm F810 Manual Do Proprietário
89
Settings
4
This function sets a time difference relative to the date and time currently set. When this setting is
enabled, the specified time difference is applied when pictures are taken.
Use this function when traveling to destinations in different time zones.
enabled, the specified time difference is applied when pictures are taken.
Use this function when traveling to destinations in different time zones.
WORLD TIME (TIME DIFFERENCE)
Press “d” or “c” to change between “
å
HOME”
and “
ß
LOCAL”.
To set the time difference, select “
ß
LOCAL”.
å
HOME: Your home time zone
ß
LOCAL: Your destination time zone
1
1 Press “a” or “b” to select “TIME DIFFERENCE”.
2 Press “c”.
2 Press “c”.
2
ＳＥＴ
ＳＥＴ
ＣＡＮＣＥＬ
ＣＡＮＣＥＬ
ＯＫ
ＯＫ
ＢＡＣＫ
ＢＡＣＫ
ＳＥＴ
ＳＥＴ
ＨＯＭＥ
ＨＯＭＥ
ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ
ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ
ＬＯＣＡＴＩＯＮ
ＬＯＣＡＴＩＯＮ
ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ
ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ
７／ １／２００４ １２：００ ＡＭ
／ １／２００４ １２：００ ＡＭ
ＳＥＴ
ＳＥＴ
ＬＯＣＡＬ
ＬＯＣＡＬ
ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ
ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ
ＬＯＣＡＴＩＯＮ
ＬＯＣＡＴＩＯＮ
ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ
ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ
７／ １／２００４ １２：００ ＡＭ
７／ １／２００４ １２：００ ＡＭ
ＳＥＴ
ＳＥＴ
ＣＡＮＣＥＬ
ＣＡＮＣＥＬ
ＯＫ
ＯＫ
ＢＡＣＫ
ＢＡＣＫ
0
1
0
2
1 Press “d” or “c” to select +, –, hour and minute.
2 Press “a” or “b” to correct the setting.
2 Press “a” or “b” to correct the setting.
h Available time setting
–23:45 to +23:45 (in 15-minute increments)
3
ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ
ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ
００ ： ００
００ ： ００
７／ １／２００４ １２：００ ＡＭ
／ １／２００４ １２：００ ＡＭ
ＳＥＴ
ＳＥＴ
ＣＡＮＣＥＬ
ＣＡＮＣＥＬ
ＯＫ
ＯＫ
ＢＡＣＫ
ＢＡＣＫ
0
1
0
2
Continued
88
When this function is enabled and the camera is
not used for 60 seconds, the screen temporarily
turns off (sleep mode) and the viewfinder lamp
blinks at 1-second intervals to save power. If the
camera remains unused for 2 or 5 minutes, it is
turned off. Use this function when you want to get
the maximum possible running time from your
battery.
not used for 60 seconds, the screen temporarily
turns off (sleep mode) and the viewfinder lamp
blinks at 1-second intervals to save power. If the
camera remains unused for 2 or 5 minutes, it is
turned off. Use this function when you want to get
the maximum possible running time from your
battery.
●
!
The Power save setting is disabled during automatic
playback and when a USB connection is being used.
playback and when a USB connection is being used.
ＳＥＴ−ＵＰ
ＳＥＴ−ＵＰ
２
１
３ ４
ＰＯＷＥＲ ＳＡＶＥ
ＰＯＷＥＲ ＳＡＶＥ
ＦＯＲＭＡＴ
ＦＯＲＭＡＴ
２ ＭＩＮ
２ ＭＩＮ
ＩＭＡＧＥ ＤＩＳＰ．
ＩＭＡＧＥ ＤＩＳＰ．
：ＯＮ
ＯＮ
：ＯＫ
：ＯＫ
ＬＣＤ
ＬＣＤ
：ＯＮ
：ＯＮ
ＳＥＴ
ＳＥＴ
ＣＡＮＣＥＬ
ＣＡＮＣＥＬ
ＯＫ
ＯＫ
ＢＡＣＫ
ＢＡＣＫ
SET-UP
POWER SAVE SETTING
ＳＥＴ
ＳＥＴ
ＯＫ
ＯＫ
ＦＯＲＭＡＴ ＯＫ？
ＦＯＲＭＡＴ ＯＫ？
ＥＲＡＳＥ ＡＬＬ ＤＡＴＡ
ＥＲＡＳＥ ＡＬＬ ＤＡＴＡ
ＦＯＲＭＡＴ
ＦＯＲＭＡＴ
ＯＫ
ＯＫ
ＣＡＮＣＥＬ
ＣＡＮＣＥＬ
Initialize (format) the xD-Picture Card for use with
the camera.
Because initializing the xD-Picture Card erases all
the frames (files), including protected frames (files).
Back up important frames (files) onto your PC or
another media.
1 Press “d” or “c” to select “OK”.
2 Pressing the “MENU/OK” button erases all the
the camera.
Because initializing the xD-Picture Card erases all
the frames (files), including protected frames (files).
Back up important frames (files) onto your PC or
another media.
1 Press “d” or “c” to select “OK”.
2 Pressing the “MENU/OK” button erases all the
frames (files) and initializes the xD-Picture Card.
●
!
If “
7
”, “
w
”, “
0
” or
“
-
” appears, see P.118 for information
before formatting the xD-Picture Card.
0
1
0
2
When the camera is in sleep mode, pressing the
shutter button down halfway wakes the camera up.
shutter button down halfway wakes the camera up.
●
!
Pressing any other button as well as the shutter button wakes
the camera up.
the camera up.
The Sleep function does not operate in SET-UP or Playback mode, but the camera will turn off if it
is left unused for a set some time (2 or 5 minutes).
is left unused for a set some time (2 or 5 minutes).
◆
To restore power to the camera
◆
When the Power save function (2 or 5 minutes
setting) has shut the camera down:
1 Set the Power switch to “OFF”.
2 Set the Power switch back to “
setting) has shut the camera down:
1 Set the Power switch to “OFF”.
2 Set the Power switch back to “
q
” or “
w
”.
0
1
0
2
FORMAT
✽ How to display the SET-UP menu (➡P.85)