Whirlpool aed4475tq Guia Do Utilizador

Not all features and options are available on all models.  

Appearance may vary.

The Automatic Dry cycle takes the guesswork out of drying time 

and enhances fabric care. The Automatic Dry cycle may be used for 

most loads.

The Cycle Selector (Timer) control may be set to ENERGY 

PREFERRED, which is good for most fabrics. At the end of the cycle, 

you may check the dryness of the load.

If the load is drier than you like, select a setting closer to Less 

 

■

Dry the next time you dry a similar load.
If the load is not as dry as you want, select a Timed cycle to 

 

■

complete drying and the next time you dry a similar load, 

choose a setting closer to Very Dry.

Drying time with an automatic cycle varies according to the type of 

fabric, size of load, and temperature setting. On some models, the 

temperature is included in the cycle selections.

The WRINKLE PREVENT features will run after your drying cycle 

is complete. It periodically starts and stops the dryer, tumbling the 

load without heat to help avoid wrinkling.

On some models, WRINKLE PREVENT automatically starts at the 

end of the cycle. Opening the door will stop this feature. On other 

models, you can set the WRINKLE PREVENT selector knob  

to ON.

NOTE: A signal will sound periodically when the WRINKLE 

PREVENT setting is selected, but only if the End of Cycle signal is 

also selected.

On some models, temperature is included in the cycle selections. 

On models with a selectable temperature knob, you may choose 

a setting based on the fabrics in your load. Drying time and 

temperature will depend on your dryer model.

You may select a drying temperature based on the fabrics in your 

load. If you are unsure of the temperature to select for a load, select 

the lower setting rather than the higher setting.

If your dryer has multiple heat settings:

A High heat setting may be used for drying heavyweight items 

 

■

such as towels and work clothes.
A Low to Medium heat setting may be used for drying medium-

 

■

weight items such as sheets, blouses, dresses, underwear, 

permanent press fabrics, lingerie, and some knits.
You may use a no heat (air) setting for rubber, plastic, or heat-

 

■

sensitive fabrics.
Line dry bonded or laminated fabrics.

 

■

NOTE: If you have questions about drying temperatures for various 

loads, refer to the care label directions.

The End of Cycle signal sounds when a cycle is complete. On  

some models, the End of Cycle Signal is fixed. On others, the  

End of Cycle Signal is selectable and the signal will sound only  

if set to On.

If the WRINKLE PREVENT feature is selected and the End of Cycle 

Signal is on, the signal sounds every few minutes. The signal stops 

when you open the door or turn the Cycle Control knob to Off.